Specification
Chemical Composition
Inconel 600 Sheet Manufacturer In Venezuela, UNS N06600 Inconel 600 Strip, Inconel 600 Steel Plates, Inconel 600 Foil Stockist, ASTM B168 Inconel Shim Sheets, Alloy 600 UNS N06600 Shim Sheet Price, Inconel Din 2.4816 Chequered Plates, Inconel 600 Circle, Inconel UNS N06600 Tubesheet Supplier ASTM B168 Inconel 600 Sheet / UNS N06600 Plate Price in Venezuela.
Inconel UNS N06600 Sheets, Alloy 600 Plates, Manufacturer Of Alloy Inconel 600 Coil, Inconel Alloy 600 Coils, ASME SB168 Inconel 600 Sheets, Alloy 600 Hot Rolled Plates, 600 Inconel Perforated Sheets Supplier, Inconel Din 2.4816 Chequered Plates, Inconel 600 Sheet Manufacturer In Venezuela, ASTM B168 Inconel 600 Sheet / UNS N06600 Plate Price List.
Detailed Information
Inconel 600 Sheets, Plates & Coils Supplier & Exporter
Amardeep Steel Centre is one of the most prominent manufacturer and supplier of Inconel 600 Sheets. Our Alloy 600 Coils is a mixture of pure and best quality metals as our experts check very carefully each and every step of the mixture. These Inconel 600 Plates, Sheets & Coils come in various Standards and Customized Sizes, Dimensions, Shapes, etc. Apart from being one of the widest used plates across several industries, this nickel chromium-based Alloy 600 Plate is usually available in sheet, coil & strips. Inconel 600 Cold Rolled Plate is often referred to as a superalloy. Also known as Inconel N06600 Thick Plate or Alloy 600 Thick Sheet has nonmagnetic properties. This nickel – chromium-based Inconel 600 Alloy Polished Plate possesses an excellent combination of valuable properties. This Alloy 600 Nickel Flat Plate also displays good resistance to heat as well as freedom from aging or from stress-related corrosion, throughout the annealed to heavily cold worked range condition. Inconel 600 Coils can be joined by the usual welding, brazing, and soldering process. Alloy 600 Sheets are almost exclusively supplied in the annealed condition.
As a characteristic of Inconel alloys, the UNS N06600 Inconel 600 Strip too is known to be an oxidation corrosion-resistant material. This is why the metal is well suited for applications or for service in those environments, where the metal has been subjected to extreme pressure and heat or temperature. When heated, Alloy 600 UNS N06600 Shim Sheet forms a thick, stable, passivating oxide on its surface. Hence, Inconel 600 plate suppliers in the Venezuela too recommend its use in those sectors, where the metal is to be exposed in high-temperature environment settings. The high-temperature tensile strength of Inconel 600 Plate has been developed by manufacturers who treat the metal to a solid solution strengthening process or a precipitation-hardening process. The high chromium content present in Inconel 600 Hot Rolled Plate raises the oxidation resistance of the alloy considerably higher, which is in comparison to that of pure nickel. The corrosion resistance property of these ASME SB16 Inconel 600 Plate has been noticed even in the presence of a reductive condition, where the Alloy 600 Sheet has the ability to resist corrosion by a number of organic as well as inorganic compounds. At cryogenic temperatures, unlike certain conventionally used stainless steel grade plates, the ASME SB 168 UNS N06600 Strips do not undergo a ductile to the brittle transition phase.
Amardeep Steel Centre is a manufacturer & supplier of Inconel 600 Sheet, Inconel 600 Sheet, 2.4816 Sheet, ASTM B168 UNS N06600 Sheet, ASME SB168 Uns N06600 Sheet, Alloy 600 Sheet, Inconel 600 Circle, UNS N06600 Circle, Inconel 600 Plate, Inconel 600 Plate, DIN 2.4816 Inconel 600 Plate, ASTM B168 UNS N06600 Plate, ASME SB168 Uns N06600 Plate, Alloy 600 Plate, Inconel 600 Tubesheet, Inconel UNS N06600 Tubesheet
Cities We Delivered
New York City, Los Angeles, Chicago, Houston, Phoenix, Philadelphia, San Antonio, San Diego, Dallas, San Jose, Austin, Jacksonville, Fort Worth, Columbus, Charlotte, San Francisco, Indianapolis, Seattle, Denver, Washington, Boston, El Paso, Nashville, Detroit, Oklahoma City, Portland, Las Vegas, Memphis, Louisville, Baltimore, Milwaukee, Albuquerque, Tucson, Fresno, Mesa, Sacramento, Atlanta, Kansas City, Colorado Springs, Omaha, Raleigh, Miami, Long Beach, Virginia Beach, Oakland, Minneapolis, Tulsa, Tampa, Arlington, New Orleans, Wichita, Bakersfield, Cleveland, Aurora, Anaheim, Honolulu, Santa Ana, Riverside, Corpus Christi, Lexington, Henderson, Stockton, Saint Paul, Cincinnati, St. Louis, Pittsburgh, Greensboro, Lincoln, Anchorage, Plano, Orlando, Irvine, Newark, Durham, Chula Vista, Toledo, Fort Wayne, St. Petersburg, Laredo, Jersey City, Chandler, Madison, Lubbock, Scottsdale, Reno, Buffalo, Gilbert, Glendale, North Las Vegas, Winston-Salem, Chesapeake, Norfolk, Fremont, Garland, Irving, Hialeah, Richmond, Boise, Spokane, Baton Rouge, Tacoma, San Bernardino, Modesto, Fontana, Des Moines, Moreno Valley, Santa Clarita, Fayetteville, Birmingham, Oxnard, Rochester, Port St. Lucie, Grand Rapids, Huntsville, Salt Lake City, Frisco, Yonkers, Amarillo, Glendale, Huntington Beach, McKinney, Montgomery, Augusta, Aurora, Akron, Little Rock, Tempe, Columbus, Overland Park, Grand Prairie, Tallahassee, Cape Coral, Mobile, Knoxville, Shreveport, Worcester, Ontario, Vancouver, Sioux Falls, Chattanooga, Brownsville, Fort Lauderdale, Providence, Newport News, Rancho Cucamonga, Santa Rosa, Peoria, Oceanside, Elk Grove, Salem, Pembroke Pines, Eugene, Garden Grove, Cary, Fort Collins, Corona, Springfield, Jackson, Alexandria, Hayward, Clarksville, Lakewood, Lancaster, Salinas, Palmdale, Hollywood, Springfield, Macon, Kansas City, Sunnyvale, Pomona, Killeen, Escondido, Pasadena, Naperville, Bellevue, Joliet, Murfreesboro, Midland, Rockford, Paterson, Savannah, Bridgeport, Torrance, McAllen, Syracuse, Surprise, Denton, Roseville, Thornton, Miramar, Pasadena, Mesquite, Olathe, Dayton, Carrollton, Waco, Orange, Fullerton, Charleston, West Valley City, Visalia, Hampton, Gainesville, Warren, Coral Springs, Cedar Rapids, Round Rock, Sterling Heights, Kent, Columbia, Santa Clara, New Haven, Stamford, Concord, Elizabeth, Athens, Thousand Oaks, Lafayette, Simi Valley, Topeka, Norman, Fargo, Wilmington, Abilene, Odessa, Columbia, Pearland, Victorville, Hartford, Vallejo, Allentown, Berkeley, Richardson, Arvada, Ann Arbor, Rochester, Cambridge, Sugar Land, Lansing, Evansville, College Station, Fairfield, Clearwater, Beaumont, Independence, Provo, West Jordan, Murrieta, Palm Bay, El Monte, Carlsbad, North Charleston, Temecula, Clovis, Springfield, Meridian, Westminster, Costa Mesa, High Point, Manchester, Pueblo, Lakeland, Pompano Beach, West Palm Beach, Antioch, Everett, Downey, Lowell, Centennial, Elgin, Richmond, Peoria, Broken Arrow, Miami Gardens, Billings, Jurupa Valley, Sandy Springs, Gresham, Lewisville, Hillsboro, Ventura, Greeley, Inglewood, Waterbury, League City, Santa Maria, Tyler, Davie, Lakewood, Daly City, Boulder, Allen, West Covina, Sparks, Wichita Falls, Green Bay, San Mateo, Norwalk, Rialto, Las Cruces, Chico, El Cajon, Burbank, South Bend, Renton, Vista, Davenport, Edinburg, Tuscaloosa, Carmel, Spokane Valley, San Angelo, Vacaville, Clinton, Bend, Woodbridge.
Our Products
Our Latest Blogs
Specifications of Inconel 600 Plate & Sheet:
Standards: ASTM, ASME, and API
Specialize Shim Sheet, Perforated Sheet, B. Q. Profile.
Size: 0.5 MM TO 200 MM WIDTH & 2500 MM TO 12500 MM LENGTH
Thickness: 1000 MM TO 2500 MM
Specifications : ASTM B 168 / SB 168
Form: Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange)
Finish: Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
ASME SB 168 UNS N06600 Sheet Chemical Composition
Alloy | C | Mn | Si | S | Cu | Fe | Ni | Cr |
Grade 600 | 0.15 maximum | 1.00 maximum | 0.50 maximum | 0.015 maximum | 0.50 maximum | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
Inconel Alloy 600 Plate Mechanical Properties
Grade |
Density |
Melting Range |
Tensile Stress |
Yield Stress (0.2%Offset) |
Elongation |
Alloy 600 |
8.47 g/cm3 |
1413 °C (2580 °F) |
Psi – 95,000 , MPa – 655 |
Psi – 45,000 , MPa – 310 |
40 % |
Inconel 600 Sheets, Plates & Coils Equivalent Grades
STANDARD |
UNS |
WERKSTOFF NR. |
GOST |
BS |
OR |
EN |
JIS |
AFNOR |
Inconel 600 |
N06600 |
2.4816 |
МНЖМц 28-2,5-1,5 |
NA 13 |
ЭИ868 |
NiCr15Fe |
NCF 600 |
NC15FE11M |
UNS N06600 Inconel 600 Plate density
UNS N06600 Inconel 600 Plate density |
304 lb/in3 |
Specific Heat Btu/lb °F | |
0.11 |
ASTM B168 Alloy 600 Sheet melting range
ASTM B168 Alloy 600 Plate melting range |
2470-2575°F |
Size chart of 600 Inconel Plate
Stocked Sizes |
|
Size (in inches) |
Size (in mm) |
.125″ |
3.18mm |
.134″ |
3.40mm |
.156″ |
3.96mm |
.187″ |
4.75mm |
.250″ |
6.35mm |
.312″ |
7.92mm |
.375″ |
9.53mm |
.500″ |
12.7mm |
.600″ |
15.9mm |
.750″ |
19.1mm |
.875″ |
22.2mm |
1″ |
25.4mm |
1.125″ |
28.6mm |
1.250″ |
31.8mm |
1.500″ |
38.1mm |
1.750″ |
44.5mm |
2″ |
50.8mm |
2.500″ |
63.5mm |
3″ |
76.2mm |
Dimensions: widths 1000/1220/1500 mm, lengths 2000/2500/3000 mm.
ASTM B168 Alloy 600 Plate Imperial Dimensions
Plate Surface finish | Gauge (in) | Width (max in) |
2B – Cold rolled, heat treated, pickled, skin passed Plate | 10–24 | 72* |
2D – Cold rolled, heat treated, pickled plate | 12–24 | 60 |
BA Mexinox only | 18–28 | 48 |
Polished plate (not brushed) | 11–24 | 60 |
Temper rolled plate Mexinox only | 13–29 | 48 |
ASTM B168 600 Alloy Plate Metric Dimensions
Plate Surface finish | Thickness (mm) | Width (max mm) |
2B – Cold rolled, heat treated, pickled, skin passed plate | 0.25–8.0 | 2032 |
2D – Cold rolled, heat treated, pickled plate | 0.4–6.35 | 1524 |
2E – Cold rolled, heat treated, mechanically descaled plate | 0.4–8.0 | 2032 |
2R – Cold rolled, bright annealed plate | 0.25–3.5 | 1524 |
2H – Work hardened plate | 0.4–6.35 | 1524 |
Polished, brushed plate | 0.5–4.0 | 1524 |
In a variety of thickness available shown below:
0.5 mm 0.6 mm 0.8 mm 1.0 mm 1.2 mm 1.5 mm 1.6 mm 1.8 mm 2.0 mm 3.0 mm |
4.0 mm 5.0 mm 6.0 mm 8.0 mm 10.0 mm 12.0 mm 15.0 mm 20.0 mm 25.4 mm |
Alloy 600 Sheet, Strip, Plate Stock List
Alloy |
Product form |
Dimension |
INCONEL 600 (75 Ni/16 Cr) |
Strip; cold rolled, annealed |
0.10×150 mm x coil, 0.12 kg/m |
ALLOY 600 (75 Ni/16 Cr) |
Strip; cold rolled, annealed |
0.40×200 mm x coil, 0.7 kg/m |
INCONEL 600 (75 Ni/16 Cr) |
Sheet; cold rolled, annealed |
0.4×914.4 mm x coil, 3.03 kg/m |
INCONEL 600 (75 Ni/16 Cr) |
Sheet; cold rolled, annealed |
0.5×1000 mm x coil, 4.14 kg/m |
INCONEL 600 (75 Ni/16 Cr) |
Sheet; cold rolled, annealed |
0.7x1000x2000 mm, 13.25 kg/pc |
INCONEL 600 (75 Ni/16 Cr) |
Sheet; cold rolled, annealed |
0.8×1219 mm x coil, 8.1 kg/m |
ALLOY 600 (75 Ni/16 Cr) |
Sheet; cold rolled, annealed |
1.0×1220 mm x coil, 10.10 kg/m |
INCONEL 600 (75 Ni/16 Cr) |
Sheet; cold rolled, annealed |
1.2x1200x3000 mm, 37.8 kg/pc |
INCONEL 600 (75 Ni/16 Cr) |
Sheet; cold rolled, pickled, annealed |
1.6x1220x3600 mm, 59 kg/pc |
ALLOY 600 (75 Ni/16 Cr) |
Sheet; cold rolled, annealed |
2.0x1200x3000 mm, 62 kg/pc |
INCONEL 600 (75 Ni/16 Cr) |
Sheet; cold rolled, annealed, pickled |
2.5x1200x3000 mm, 76 kg/pc |
ALLOY 600 (75 Ni/16 Cr) |
Sheet; cold rolled, soft annealed, descaled, sheared, tread plate, Checker Plate |
3.0x1220x3000 mm, 92 kg/pc |
ALLOY 600 (75 Ni/16 Cr) |
Plate; hot rolled, annealed |
4.0x1200x3000 mm, 122 kg/pc |
ALLOY 600 (75 Ni/16 Cr) |
Plate; hot rolled, annealed |
5.0x2400x6000 mm, 606 kg/pc |
ALLOY 600 (75 Ni/16 Cr) |
Plate; hot rolled, soft annealed, descaled, sheared, tread plate, Checker Plate |
6.0x2440x6000 mm, 746 kg/pc |
INCONEL 600 (75 Ni/16 Cr) |
Plate; hot rolled, descaled, annealed |
8.0x2000x4000 mm, 564 kg/pce |
ALLOY 600 (75 Ni/16 Cr) |
Plate; hot rolled, soft annealed, descaled, sheared, tread plate, Checker Plate |
10.0x2000x4000 mm, 726 kg/pc |
ALLOY 600 (75 Ni/16 Cr) |
Plate; hot rolled, soft annealed, descaled, sheared, tread plate, Checker Plate |
12.0x2000x3000 mm, 616 kg/pc |
INCONEL 600 (75 Ni/16 Cr) |
Plate; hot rolled, annealed |
20.0x915x1235 mm, 193 kg/pc |
Weight per Unit of Alloy 600 Inconel Plate
600 inconel Sheet Weight & Density
Thickness |
Alloy |
Plate Weight per Unit Area |
Density |
3/16 inches |
Inconel 600 |
0.06000 lbs/in²42.184176 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
1/4 inches |
Inconel 600 |
0.08 lbs/in²56.245568 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
3/8 inches |
Inconel 600 |
0.121 lbs/in²85.0714216 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
1/2 inches |
Inconel 600 |
0.161 lbs/in²113.1942056 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
5/8 inches |
Inconel 600 |
0.196 lbs/in²137.8016416 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
3/4 inches |
Inconel 600 |
0.235 lbs/in²165.221356 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
7/8 inches |
Inconel 600 |
0.274 lbs/in²192.6410704 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
1 inches |
Inconel 600 |
0.313 lbs/in²220.0607848 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
1 1/4 inches |
Inconel 600 |
0.391 lbs/in²274.9002136 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
1 1/2 inches |
Inconel 600 |
0.47 lbs/in²330.442712 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
1 3/4 inches |
Inconel 600 |
0.549 lbs/in²385.9852104 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
2 inches |
Inconel 600 |
0.627 lbs/in²440.8246392 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
2 1/4 inches |
Inconel 600 |
0.705 lbs/in²495.664068 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
2 1/2 inches |
Inconel 600 |
0.784 lbs/in²551.2065664 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
2 3/4 inches |
Inconel 600 |
0.862 lbs/in²606.0459952 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
3 inches |
Inconel 600 |
0.941 lbs/in²661.5884936 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
Related Products
- ASTM B168 Inconel 600 Sheet / UNS N06600 Plate
- Inconel 625 Plate / UNS N06625 Sheets
- Inconel 601 Plate / UNS N06601 Sheets
- DIN 2.4858 Incoloy 825 Plate / UNS N06600 Sheet
- Incoloy 800 Plate / UNS N08800 Sheet
- Incoloy 800H Plate / UNS N08810 Sheet
- Incoloy 800HT Plate / UNS N08811 Sheet
- Hastelloy C276 Plate Supplier
- Copper Nickel 90/10 Plate, C70600 Cu-Ni 90/10 Sheet Stockist in USA
- Stainless Steel 253 MA Sheets
- Super Duplex Steel UNS S32750 Plate
- Duplex Steel S31803 Plate/ Sheet Supplier
- Duplex Steel S32205 Plate/ Sheets Supplier
- Sanicro 28 Plate/Sheet Supplier
- ASTM A242 Type 1 Corten Steel Plate
- Corten A588 Grade A Steel Plate
- Corten A588 Grade B Steel Plate
- Corten A Steel Plates & Sheets
- Corten Steel B Plate
- Corten Steel S355JOWP Plates
- Corten Steel S355J2G1W Plates/Sheets
- Corten Steel S355J2G2W Plate
- Corten Steel S355J2W Plates
- Corten Steel S355J2W+N Plate
- Corten Steel S355JOWP+N Plates Manufacturer
- Corten Steel S355K2G1W Plates/Sheets
- Corten Steel S355K2G2W Steel Plate
Before You Go...
would you like a copy of our Handy Guide to leasing an industrial unit straight to your inbox?
Call Us At
Feel free to call on
+91-9619103479
Drop Mail
For Domestic Queries:
sales@amardeepsteel.com
For International Queries:
marketing@amardeepsteel.com