Nickel Products

ASTM B162 Nickel 201 Plate / UNS N02201 Sheet

Home » Argentina Country » Nickel 201 Plate, Nickel N02201 Sheet Supplier

f

Specification

Chemical Composition

Nickel 201 Plate / UNS N02201 Sheet

Nickel 201 Plates, Nickel Alloy 201 Circle, 201 Nickel Hot Rolled Plates Supplier in Argentina, Stockist of Ni 201 Strip Tape, Nickel Alloy Ni-201 Shim, Nickel alloy 201 price in Argentina, ASTM B 162 Nickel 201 Shim Sheets, UNS N02201 Nickel 201 Coil Price.

Nickel Werkstoff No 2.4068 Sheets, Nickel 201 Sheets Stockist, ASME SB 162 Nickel 201 Plate, Nickel 201 Cold Rolled Plates, Stock of Nickel 201 Alloy Shim Sheet, Stock of Nickel 201 Alloy Shim Sheet, Nickel 2201 2D Plate, ASME SB 162 Alloy 201 Nickel Polished Plate in Argentina. Nickel 201 Plate, UNS N02201 Sheet Price list.

Detailed Information

Nickel Alloy 201 Plates, Sheets & Coils Supplier

Amardeep Steel Centre is an established manufacturer, stockist & supplier of Nickel 201 Plate. Nickel 201 is considered a commercially pure nickel alloy. It has higher nickel content than the Ni 200 alloy. It can contain other elements in the composition such as sulfur, carbon, copper, silicon, manganese, and iron but nickel is over 99% of the composition. The lower carbon content present in Nickel N02201 Polish Plate aids in the prevention of embrittlement, which could be caused by inter-granular carbon on exposure to elevated temperatures. Designated as the Ni 2.4068, the alloy is used mostly in chemical and petrochemical industries. There are different standards, schedules, and pressure classes of the Alloy 2.4068 material to make sure that the correct combinations of the properties are selected in any given product. Ni 201 Alloy Cold Rolled Plate has good resistance to corrosion to both acids as well as to alkalis and is found to be most useful under reducing conditions. Nickel 201 sheet suppliers in the Argentina also observe that this metal is particularly resistant to sodium hydroxide even at a temperature above 300C. The material used to produce Pure 201 Nickel Hot Rolled Plate shows good resistance, in salt solutions that are not only acidic or alkaline in nature but also in those salt solutions which are neutral. Therefore the 201 Nickel Clad Plate could be used in the soap industry for the manufacture of soap.

The Pure Nickel 201 Sheet can also be used in the chlorination of aliphatic hydrocarbons such as methane, benzene, or ethane. Other metals in contact with Nickel 201 Perforated Coils, particularly in a damp or acidic environment, may suffer galvanic corrosion even though the stainless metal may be unaffected. These Alloy 201 Sheets are generally highly resistant to attack from acids, but this quality depends on the kind and concentration of the acid, the surrounding temperature, and the type of steel. Our Alloy 201 Plates is resistant to sulphuric acid at room temperature, even in high concentrations.

We Stock Nickel 201 Sheet, 2.4068 Sheet, ASTM B162 Uns N02201 Sheet, ASME SB162 UNS N02201 Sheet, Alloy 201 Sheet, Nickel 201 Plate, 2.4068 Plate, ASTM SB162 UNS N02201 Plate, ASME B162 UNS N02201 Plate, Alloy 201 Plate

Cities We Delivered

New York City, Los Angeles, Chicago, Houston, Phoenix, Philadelphia, San Antonio, San Diego, Dallas, San Jose, Austin, Jacksonville, Fort Worth, Columbus, Charlotte, San Francisco, Indianapolis, Seattle, Denver, Washington, Boston, El Paso, Nashville, Detroit, Oklahoma City, Portland, Las Vegas, Memphis, Louisville, Baltimore, Milwaukee, Albuquerque, Tucson, Fresno, Mesa, Sacramento, Atlanta, Kansas City, Colorado Springs, Omaha, Raleigh, Miami, Long Beach, Virginia Beach, Oakland, Minneapolis, Tulsa, Tampa, Arlington, New Orleans, Wichita, Bakersfield, Cleveland, Aurora, Anaheim, Honolulu, Santa Ana, Riverside, Corpus Christi, Lexington, Henderson, Stockton, Saint Paul, Cincinnati, St. Louis, Pittsburgh, Greensboro, Lincoln, Anchorage, Plano, Orlando, Irvine, Newark, Durham, Chula Vista, Toledo, Fort Wayne, St. Petersburg, Laredo, Jersey City, Chandler, Madison, Lubbock, Scottsdale, Reno, Buffalo, Gilbert, Glendale, North Las Vegas, Winston-Salem, Chesapeake, Norfolk, Fremont, Garland, Irving, Hialeah, Richmond, Boise, Spokane, Baton Rouge, Tacoma, San Bernardino, Modesto, Fontana, Des Moines, Moreno Valley, Santa Clarita, Fayetteville, Birmingham, Oxnard, Rochester, Port St. Lucie, Grand Rapids, Huntsville, Salt Lake City, Frisco, Yonkers, Amarillo, Glendale, Huntington Beach, McKinney, Montgomery, Augusta, Aurora, Akron, Little Rock, Tempe, Columbus, Overland Park, Grand Prairie, Tallahassee, Cape Coral, Mobile, Knoxville, Shreveport, Worcester, Ontario, Vancouver, Sioux Falls, Chattanooga, Brownsville, Fort Lauderdale, Providence, Newport News, Rancho Cucamonga, Santa Rosa, Peoria, Oceanside, Elk Grove, Salem, Pembroke Pines, Eugene, Garden Grove, Cary, Fort Collins, Corona, Springfield, Jackson, Alexandria, Hayward, Clarksville, Lakewood, Lancaster, Salinas, Palmdale, Hollywood, Springfield, Macon, Kansas City, Sunnyvale, Pomona, Killeen, Escondido, Pasadena, Naperville, Bellevue, Joliet, Murfreesboro, Midland, Rockford, Paterson, Savannah, Bridgeport, Torrance, McAllen, Syracuse, Surprise, Denton, Roseville, Thornton, Miramar, Pasadena, Mesquite, Olathe, Dayton, Carrollton, Waco, Orange, Fullerton, Charleston, West Valley City, Visalia, Hampton, Gainesville, Warren, Coral Springs, Cedar Rapids, Round Rock, Sterling Heights, Kent, Columbia, Santa Clara, New Haven, Stamford, Concord, Elizabeth, Athens, Thousand Oaks, Lafayette, Simi Valley, Topeka, Norman, Fargo, Wilmington, Abilene, Odessa, Columbia, Pearland, Victorville, Hartford, Vallejo, Allentown, Berkeley, Richardson, Arvada, Ann Arbor, Rochester, Cambridge, Sugar Land, Lansing, Evansville, College Station, Fairfield, Clearwater, Beaumont, Independence, Provo, West Jordan, Murrieta, Palm Bay, El Monte, Carlsbad, North Charleston, Temecula, Clovis, Springfield, Meridian, Westminster, Costa Mesa, High Point, Manchester, Pueblo, Lakeland, Pompano Beach, West Palm Beach, Antioch, Everett, Downey, Lowell, Centennial, Elgin, Richmond, Peoria, Broken Arrow, Miami Gardens, Billings, Jurupa Valley, Sandy Springs, Gresham, Lewisville, Hillsboro, Ventura, Greeley, Inglewood, Waterbury, League City, Santa Maria, Tyler, Davie, Lakewood, Daly City, Boulder, Allen, West Covina, Sparks, Wichita Falls, Green Bay, San Mateo, Norwalk, Rialto, Las Cruces, Chico, El Cajon, Burbank, South Bend, Renton, Vista, Davenport, Edinburg, Tuscaloosa, Carmel, Spokane Valley, San Angelo, Vacaville, Clinton, Bend, Woodbridge.

Our Products

Our Latest Blogs

Specification of Nickel 201 Plate

Grade Nickel 201 (99.0 Ni min) – UNS N02201
Type Clad Plate, Rolling Plate, Flat Shim, Plain Sheet, Rolling Sheet Rolls, Foils, Coils, Plate, Strip, Sheet, Flats, Blank (Circle), Flat Sheet, Shim Sheet, soft annealed, descaled, sheared, annealed, Checker Plate, tread plate
ASTM B162 Alloy 201 Plate surface Hot rolled plate (HR), Cold rolled sheet (CR), No.1 finish hot rolled ASTM B162 Alloy 201 Plate, BA, No.3, No.4, No.6, No.1, No. 2D, No. 2B, BA NO(8), No.7, 2B, 2D, SATIN (Met with Plastic Coated), 2B, 1D, No.4, 8K, BA, hairline, brush, satin, mirror, etc.
ASTM B162 Alloy 201 Plate Length 0-12mm or as required
Alloy Nickel 201 Plate Thickness 0.3 to 1200 mm or as required
201 Nickel Plate Width 0-2500mm or as required
UNS N02201 Nickel 201 Plate Process Hot/ Cold Rolled

Nickel 201 Plate, Sheet & Coil Chemical Composition

Grade C Mn Si S Cu Fe Ni
Nickel 201 0.02 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

Nickel 201 Sheets, Plates & Coils Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 201 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Equivalent Grades for 201 Nickel Sheets & Plates

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 201 2.4068 N02201 NW 2201 NA 12 НП-2 LC-Ni 99
UNS N02201 Nickel 201 Plate density
lb/in 3 : 0.321 g/cm 3: 8.89
ASTM B162 Alloy 201 Plate melting range
°F: 2615-2635 °C: 1435-1446

Type of Nickel 201 Plate we Manufacture, Stocks & Supply

201 Nickel Plate UNS N02201 Nickel 201 Rolling Plate
ASTM B162 Alloy 201 Chequered Plate Alloy Nickel 201 Quarto Plate
UNS N02201 Nickel 201 Cold Rolled Plate Alloy Nickel 201 Bbq Plate
Alloy Nickel 201 Hot Rolled Plate ASTM B162 Alloy 201 Perforated Plate
Nickel Alloy 201 Custom Cut Plate Nickel 201 Nickel Alloy Sheet
Nickel 201 Nickel Alloy Embossed Plate 201 Nickel Plasma Cutting Plate
Alloy Nickel 201 Plate Mill Finish Nickel 201 Din 2.4068 Thin Plate
ASTM B162 Alloy 201 Plate 2b Finish Alloy 201 Nickel Diamond Plate
Nickel 201 Alloy Checker Plate 2.4068 Alloy 201 Polished Plate
2.4068 Nickel 201 Checkered Plate ASTM B162 Alloy 201 Laser Cut Plate
Nickel 201 Superalloy 1/4 Inch Plate 2.4068 Nickel 201 Perforated Sheet
Nickel 201 Grade 10mm Plate Nickel Alloy 201 Cold Rolled Sheet
2.4068 Alloy 201 Plate Brushed Finish Nickel 201 Superalloy Hot Rolled Sheet
UNS N02201 Alloy 201 Plate Mirror Finish Nickel 201 Grade Chequered Plate
Nickel 201 Din 2.4068 Chequer Plate UNS N02201 Alloy 201 Tread Plate
Alloy 201 Nickel Clad Plate Nickel 201 Alloy Tisco Plate

Size chart of 201 Nickel Plate

Stocked Sizes
Size (in inches) Size (in mm)
.125″ 3.18mm
.134″ 3.40mm
.156″ 3.96mm
.187″ 4.75mm
.250″ 6.35mm
.312″ 7.92mm
.375″ 9.53mm
.500″ 12.7mm
.601″ 15.9mm
.750″ 19.1mm
.875″ 22.2mm
1″ 25.4mm
1.125″ 28.6mm
1.250″ 31.8mm
1.500″ 38.1mm
1.750″ 44.5mm
2″ 50.8mm
2.500″ 63.5mm
3″ 76.2mm
Dimensions: widths 1000/1220/1500 mm, lengths 2000/2500/3000 mm.

Weight per Unit of Alloy 201 Nickel Plate

201 Nickel Sheet Weight & Density

Thickness

Plate Weight per Unit Area

Density

3/16 inches

0.06000 lbs/in²42.184176 kg/m²

0.315 lbs/in³8.72 g/cm³

1/4 inches

0.08 lbs/in²56.245568 kg/m²

0.315 lbs/in³8.72 g/cm³

3/8 inches

0.121 lbs/in²85.0714216 kg/m²

0.315 lbs/in³8.72 g/cm³

1/2 inches

0.161 lbs/in²113.1942056 kg/m²

0.315 lbs/in³8.72 g/cm³

5/8 inches

0.196 lbs/in²137.8016416 kg/m²

0.315 lbs/in³8.72 g/cm³

3/4 inches

0.235 lbs/in²165.221356 kg/m²

0.315 lbs/in³8.72 g/cm³

7/8 inches

0.274 lbs/in²192.6410704 kg/m²

0.315 lbs/in³8.72 g/cm³

1 inches

0.313 lbs/in²220.0607848 kg/m²

0.315 lbs/in³8.72 g/cm³

1 1/4 inches

0.391 lbs/in²274.9002136 kg/m²

0.315 lbs/in³8.72 g/cm³

1 1/2 inches

0.47 lbs/in²330.442712 kg/m²

0.315 lbs/in³8.72 g/cm³

1 3/4 inches

0.549 lbs/in²385.9852104 kg/m²

0.315 lbs/in³8.72 g/cm³

2 inches

0.627 lbs/in²440.8246392 kg/m²

0.315 lbs/in³8.72 g/cm³

2 1/4 inches

0.705 lbs/in²495.664068 kg/m²

0.315 lbs/in³8.72 g/cm³

2 1/2 inches

0.784 lbs/in²551.2065664 kg/m²

0.315 lbs/in³8.72 g/cm³

2 3/4 inches

0.862 lbs/in²606.0459952 kg/m²

0.315 lbs/in³8.72 g/cm³

3 inches

0.941 lbs/in²661.5884936 kg/m²

0.315 lbs/in³8.72 g/cm³

Dimensions of Nickel 201 Plate

ASTM B162 Alloy 201 Plate Imperial Dimensions
Plate Surface finish Gauge (in) Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate 10–24 72*
2D – Cold rolled, heat treated, pickled plate 12–24 60
BA Mexinox only 18–28 48
Polished plate (not brushed) 11–24 60
Temper rolled plate Mexinox only 13–29 48

ASTM B162 201 Alloy Plate Metric Dimensions

Plate Surface finish Thickness (mm) Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate 0.25–8.0 2032
2D – Cold rolled, heat treated, pickled plate 0.4–6.35 1524
2E – Cold rolled, heat treated, mechanically descaled plate 0.4–8.0 2032
2R – Cold rolled, bright annealed plate 0.25–3.5 1524
2H – Work hardened plate 0.4–6.35 1524
Polished, brushed plate 0.5–4.0 1524

Information of Nickel 201 Plate for Buyers

ASTM B162 Alloy 201 Plate, Sheet and Strip ASTM B 162/ ASME SB 162, DIN 17750, ISO 6208
Nickel 201 Plate standards and approvals
  • ASTM A 480
  • ISO 15510
  • EN ISO 18286
  • EN 10088-1
  • EN 10051
  • ASTM A 959
  • EN ISO 9445
  • ASME IID
Tolerances of width and thickness
  • EN 10151 ASTM B162 Alloy 201 strip for springs
  • EN 10258 (formerly DIN 59381)
  • EN 10088 ASTM B162 Alloy 201 strip (general)
UNS N02201 Plate Hardness Half Hard, Soft, Spring Hard, Quarter Hard, Hard ASTM B162 Alloy 201 Sheet suppliers
Availability of ASTM B162 Alloy 201 Foil sizes
  • Width: Up to 500 mm (19.5 in)
  • Thickness : 8-100 microns (0.00031-0.004 in)
  • Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns.
Standard ASTM B162 Alloy 201 Plate & Sheet Sizes 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm
  • Hot rolled 201 Nickel Plate 3.0–10.0 mm
  • Cold rolled 201 Nickel Plate 0.5-6.4 mm
Plasma profiles As per customer’s drawings
Profiling To provide a full profiling service in India we use numerous profiling methods including:
  • Plasma Plate Cutting
  • Oxy-propane Flame Cutting
  • Laser Plate Cutting
Value added services for ASTM B162 Alloy 201 Coil
  • Blanking
  • Slitting
  • Cut-to-length
  • Polishing
Manufacturer & exporter of
  • Alloy Nickel 201 Clad plate: Alloy Nickel 201 Clad plate is a composite steel plate made by bonding UNS N02201 Nickel 201 plate, etc.
  • 201 Nickel Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [601 mm] and over in width;
  • ASTM B162 Alloy 201 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;
  • ASTM B162 Alloy 201 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [601 mm] in width.
Value added services for ASTM B162 Alloy 201 Plate Waterjet cutting, Laser cutting, Bending and mechanical processing, Plasma cutting, welding, edge preparation, sawing and shearing.
Nickel 201 Plate Origin European Origin, Indian Origin, Japanese Origin
Test SGS testing, UT, TUV etc
Why buy ASTM B162 Alloy 201 Plate from Metal Tube Industries?
  • Mill Test Certificate is supplied with shipment.
  • Free sample
  • EN 10204 3.1
  • Minimum Nitrogen content and Ferrite Count Test
  • Free quote
  • NABL Approved Lab Reports
  • Tested to ASTM A923 Method “C” or ASTM G48 Method “A”.
  • Any third party inspection is accepted.
Packing of Nickel 201 Plate Bundles with waterproof cloth outside or plywood box

Before You Go...

would you like a copy of our Handy Guide to leasing an industrial unit straight to your inbox?

    Call Us At

    Drop Mail

    For Domestic Queries:
    sales@amardeepsteel.com

    For International Queries:
    marketing@amardeepsteel.com

    Plates & Sheets Products

    Inconel ProductsASTM B168 Inconel 600 Sheet / UNS N06600 Plate | Inconel 625 Plate / UNS N06625 Sheets | Inconel 601 Plate / UNS N06601 Sheets Incoloy ProductsDIN 2.4858 Incoloy 825 Plate / UNS N06600 Sheet | Incoloy 800 Plate / UNS N08800 Sheet | Incoloy 800H Plate / UNS N08810 Sheet | Incoloy 800HT Plate / UNS N08811 Sheet | Hastelloy Products: Hastelloy C276 Plate Supplier | Monel Products: Monel 400 Plate / ASTM SB127 UNS N04400 Sheet | Nickel AlloyNickel 200 Plate, Nickel N02200 Sheet Stockist | Nickel 201 Plate, Nickel N02201 Sheet Supplier | Brass & Bronze ProductsNaval Brass Plate Stockist | Aluminum Bronze Plate/ Sheet Manufacturer | Nickel Aluminum Bronze Sheet/Plate | Copper Nickel ProductsCopper Nickel 70/30 Plate/ C17500 Cu-Ni Sheet | Copper Nickel 90/10 Plate, C70600 Cu-Ni 90/10 Sheet Stockist in USA | Stainless Steel 253MA Products: Stainless Steel 253 MA Sheets | Duplex And Super Duplex products: Super Duplex Steel UNS S32750 Plate | Duplex Steel S31803 Plate/ Sheet Supplier | Duplex Steel S32205 Plate/ Sheets Supplier | Sanicro 28 Plate Products: Sanicro 28 Plate/Sheet Supplier | Corten Steel Products: ASTM A242 Type 1 Corten Steel Plate | Corten A588 Grade A Steel Plate | Corten A588 Grade B Steel Plate | Corten A Steel Plates & Sheets | Corten Steel B Plate | Corten Steel S355JOWP Plates | Corten Steel S355J2G1W Plates/Sheets | Corten Steel S355J2G2W Plate | Corten Steel S355J2W Plates | Corten Steel S355J2W+N Plate | Corten Steel S355JOWP+N Plates Manufacturer | Corten Steel S355K2G1W Plates/Sheets | Corten Steel S355K2G2W Steel Plate

    Pipes Products

    Hastelloy C276 ProductsHastelloy C276 Pipe Supplier | Monel Pipes Products: Monel 400 Welded Pipes / UNS N04400 Fabricated Pipe | Nickel Alloy Products: Nickel 200 Welded Pipe Supplier | Nickel 201 Welded Pipe Supplier | Brass & Bronze Products: C46400 Naval Brass Pipe Stockist | C16400 Aluminum Bronze Pipe Supplier | C63000 Nickel Aluminum Bronze Pipes | Copper Nickel Products: Copper Nickel 70/30 Pipe, ASTM B466 Cupro Nickel 70/30 Pipe | Copper Nickel 90/10 Pipe, C70600 Cu-Ni 90/10 Pipe Stockist | Stainless Steel 253MA Pipes Products: Stainless Steel 253 MA Pipes | Duplex & Super Duplex Pipe Products: Super Duplex Steel UNS S32750 Welded Pipes | Duplex Steel S32205 Pipe | Duplex Steel S31803 Welded Pipes | Sanicro 28 Pipe Products: Sanicro 28 Pipe | Corten Steel Pipe Product: CORTEN A Pipes Manufacturer | Corten B Pipes Manufacturer | S355JOWP Pipes Manufacturer | S355J2W Pipes Manufacturer | Corten Steel ASTM A588 Pipes | ASTM A423 Gr 1 Pipe | ASTM A242 Corten Steel Pipes Manufacturer | Inconel Products: ASTM B167 Inconel 600 Welded Pipe | ASTM B444 Inconel 625 Welded Pipe | ASTM B167 UNS N06601 Inconel 601 Welded Pipe | Incoloy Products: UNS N08825 Incoloy 825 Welded Pipe | UNS N08800 Incoloy 800 Pipe | UNS N08811 Incoloy 800H Pipe | UNS N08811 Incoloy 800HT Pipe | Stainless Steel Pipe Products: ASTM A312 Stainless Steel 304 Pipes | ASTM A312 / A249 Stainless Steel 304L Welded Pipe | ASTM A312 Stainless Steel 304H Pipes | ASTM A312 Stainless Steel 347H Pipes | DIN 1.4541 Stainless Steel 321 Welded Pipe | Stainless Steel 310S Pipes | Stainless Steel 316 Welded Pipes | Stainless Steel 316L Welded Pipes | Stainless Steel 904L Welded Pipe | Alloy Steel Pipes Products: ASTM A335 Alloy Steel P5 Pipe Manufacturer | ASTM A335 Alloy Steel P9 Pipe | ASTM A335 Alloy Steel P11 Pipe | ASTM A335 Alloy Steel P12 Pipe | ASTM A335 Alloy Steel P22 Pipe | ASTM A335 Alloy Steel P91 Pipe | ASTM A335 Alloy Steel P92 Pipe

    Tubes products

    Carbon Steel Tube ProductsCarbon Steel ASTM A192 Tube Supplier | ASTM A179 Tube Supplier | Carbon Steel ASTM A210 Grade A1 Tube | Carbon Steel ASTM A178 Tube Supplier | ASME SA423 GR 1 Corten Steel Tubes Manufacturer |ASTM A334 Grade 1 Low-Temperature Carbon Steel Tube Manufacturer |Carbon Steel ASTM A214 Tube | Stainless Steel Tube ProductsStainless Steel 304 Tubes | Stainless Steel 304H Tubes | Stainless Steel 304l TubesStainless Steel 310 Tubes | Stainless Steel 310S Tubes | Stainless Steel 310H Tubes | Stainless Steel 316 Tubes | Stainless Steel 316H Tubes | Stainless Steel 316L Tubes Supplier, UNS S31603 SS 316L Tube | Stainless Steel 316TI Tubes, UNS S31635 Seamless Tubes | Stainless Steel 347 Seamless Tubes/ UNS S34700 SS 347 Tube | Stainless Steel 347H Seamless Tubes/ UNS S34709 SS Tube | Stainless Steel 321 Seamless Tubes/ UNS S32100 SS 321 Tube | Stainless Steel 321H Seamless Tubes/ UNS S32109 SS 321H Tube | Stainless Steel 904L Seamless Tubes / UNS S904L00 SS 904L Tubes | Inconel Tube Products:  UNS N06600 Inconel 600 Tube | UNS N06601 Inconel 601 Tubes | UNS N06625 Inconel 625 Tube Supplier | UNS N06690 Inconel 690 Tubes | Incoloy Tube ProductsUNS N08800 Incoloy 800 Tubes | UNS N08810 Incoloy 800H Tubes | UNS N08811 Incoloy 800HT Tubes | UNS N08825 Incoloy 825 Tube | Monel Tubes ProductsMonel 400 Tube Supplier | Nickel Tube ProductsNickel 200 Tube Suppliers | Nickel 201 Tube Suppliers | Hastelloy Tube ProductsHastelloy C276 Tube Manufacturer | Titanium Tube ProductsTitanium Grade 2 Tube Manufacturer | Titanium Grade 5 Tube Manufacturer | Titanium Grade 7 Tube Manufacturer | Titanium Grade 12 Tube Supplier | Brass Tube ProductsBrass Tube Manufacturer | Admiralty Brass Tube | Aluminum Brass C68700 Tubes Supplier | Alloy 20/28 Tube Products : Alloy 20 Tube Supplier | Sanicro 28 Tube/ UNS N08028 Sanicro 28 Tubes | SMO 254 Tube Products | SMO 254 Tube Products | SMO 254 Tube, 254 SMO S31254 Seamless Tubes Supplier | Copper Nickel Tube ProductsCopper Nickel 90/10 Tube Manufacturer | Copper Nickel 70/30 Tube Manufacturer | Copper Nickel 95/5 Tubes Manufacturer | Copper Nickel C71640 Tubes Manufacturer | Alloy Steel Tube Products ASTM A213 Alloy Steel T5 Tube Manufacturer | ASTM A213 Alloy Steel T9 Tube Manufacturer | ASTM A213 Alloy Steel T11 Tube Supplier | ASTM A213 Alloy Steel T12 Tube Supplier | ASTM A213 Alloy Steel T22 Tube Manufacturer | ASTM A213 Alloy Steel T91 Tube Supplier | ASTM A213 Alloy Steel T92 Tube Supplier Corten Steel Tubes: S355JOWP Tubes Manufacturer | S355J2W Tubes Manufacturer | Corten B Tubes Manufacturer | Corten A Tubes Manufacturer | ASME SA423 GR 1 Corten Steel Tubes Manufacturer

    Amardeep Steel Centre

    Amardeep Steel and its huge family of companies are on an endeavor to become the most trusted partner for construction projects all across the globe. Through decades of experience and hard work.

    Contact Us At

    Sanghrajka House, 2nd Floor, Opera House, Near Indusind Bank, Lamington Road Mumbai: 400004 India

    Call Now ButtonCall Us Now