Specification
Chemical Composition
Manufacturer Of Hastelloy C276 Plate, ASTM B575 Hastelloy UNS N10276 Shim Sheets, Hastelloy Din 2.4819 Sheets, Hastelloy C276 Chequered Plates, Hastelloy C276 Coils Supplier, ASME SB575 Hastelloy Sheet Price in Mexico, Hastelloy C276 Hot Rolled Steel Plate, Hastelloy C276 Plate Suppliers in Mexico.
Alloy C276 Cold Rolled Sheets, C276 Alloy Perforated Sheets, Hastelloy C276 SB575 Thick Plate, Stockist Of Hastelloy Alloy C276 Sheet In Mexico, Stockist Of Hastelloy Alloy C276 Sheet, SB 575 Hastelloy C276 Strip, UNS N10276 Hastelloy Alloy C276 Circle, ASTM B575 C276 Hastelloy 2D Plate, Hastelloy C276 Tubesheet. Hastelloy C276 Plate Price list.
Detailed Information
Hastelloy C276 Plate & Sheet Manufacturer & Stockist
Hastelloy C276 ASTM Standard B575 Plate is a nickel-molybdenum-chromium superalloy with an enhancement of tungsten made to have superb deterioration resistance in a wide variety of extreme atmospheres. Although there are a number of variations of the nickel alloy, Hastelloy C276 Plate is without a doubt the most commonly used. Alloy C276 Plate shows superb deterioration resistance in a range of extreme settings and also media. Like lots of other nickel alloys, it is pliable, easily developed and also welded. Hastelloy C276 Plates (UNS N10276) is normally solution heat-treated at 2050 Degree F and rapid quenched. Parts which have been hot-formed should be solution heat-treated prior to final fabrication or installation, if possible. The materials used in the manufacture of Hastelloy C-276 UNS N10276 Cold Rolled Plate must not only confirm the chemical requirements, but also the mechanical requirements as specified in the ASTM B575 standard . With regards to the mechanical properties of the hastelloy c276 Plate, this particular alloy needs to conform to the required tensile properties. The parameter of these tensile strength properties for this superalloy is inclusive of the Hastelloy C276 Grade Shim Stock materials tensile strength, yield strength, elongation, as well as its Rockwell hardness. Further the produced C276 Hastelloy Shim Sheet and strip needs to also conform to the specified grain sizes.
Alloy C276 Sheets welding products are used as identical composition filler material for welding Alloy C276 Plates wrought and cast products, for different welding uses including other nickel-chromium-molybdenum alloys and stainless steels, and for weld intersection or cladding of steels. Inconel C276 Sheets are used for Heat exchangers, Reaction vessels, Evaporators, and more. ASTM B575 UNS N10276 Hastelloy C276 Sheet is frequently utilized in several industries, consisting of petrochemical, chemical oil and gas, power generation, pharmaceutical, pulp and paper manufacturing and drainage treatment. Hastelloy C276 Coil has superior resistance to matching, tension deterioration breaking as well as oxidizing environments. ASME SB 575 UNS N10276 material likewise displays resistance to deterioration by salt water in crevice conditions, which can generate hostile attack in other commonly utilized materials. UNS N10276 Plate is usually remedy heat-treated at 2050 Degree F and fast quenched.
We At Amardeep Steel Centre Manufacturer, Stock & Supply Hastelloy C276 Sheet, 2.4819 Sheet, ASTM B575 UNS N10276 Sheet, ASME SB575 UNS N10276 Sheet, Alloy C276 Sheet, Hastelloy C276 Circle, UNS N10276 Circle, Hastelloy C276 Plate, 2.4819 Plate, ASTM B575 UNS N10276 Plate, ASME SB575 UNS N10276 Plate, Alloy C276 Plate, Hastelloy C276 Tubesheet, UNS N10276 Tubesheet.
Cities We Delivered
New York City, Los Angeles, Chicago, Houston, Phoenix, Philadelphia, San Antonio, San Diego, Dallas, San Jose, Austin, Jacksonville, Fort Worth, Columbus, Charlotte, San Francisco, Indianapolis, Seattle, Denver, Washington, Boston, El Paso, Nashville, Detroit, Oklahoma City, Portland, Las Vegas, Memphis, Louisville, Baltimore, Milwaukee, Albuquerque, Tucson, Fresno, Mesa, Sacramento, Atlanta, Kansas City, Colorado Springs, Omaha, Raleigh, Miami, Long Beach, Virginia Beach, Oakland, Minneapolis, Tulsa, Tampa, Arlington, New Orleans, Wichita, Bakersfield, Cleveland, Aurora, Anaheim, Honolulu, Santa Ana, Riverside, Corpus Christi, Lexington, Henderson, Stockton, Saint Paul, Cincinnati, St. Louis, Pittsburgh, Greensboro, Lincoln, Anchorage, Plano, Orlando, Irvine, Newark, Durham, Chula Vista, Toledo, Fort Wayne, St. Petersburg, Laredo, Jersey City, Chandler, Madison, Lubbock, Scottsdale, Reno, Buffalo, Gilbert, Glendale, North Las Vegas, Winston-Salem, Chesapeake, Norfolk, Fremont, Garland, Irving, Hialeah, Richmond, Boise, Spokane, Baton Rouge, Tacoma, San Bernardino, Modesto, Fontana, Des Moines, Moreno Valley, Santa Clarita, Fayetteville, Birmingham, Oxnard, Rochester, Port St. Lucie, Grand Rapids, Huntsville, Salt Lake City, Frisco, Yonkers, Amarillo, Glendale, Huntington Beach, McKinney, Montgomery, Augusta, Aurora, Akron, Little Rock, Tempe, Columbus, Overland Park, Grand Prairie, Tallahassee, Cape Coral, Mobile, Knoxville, Shreveport, Worcester, Ontario, Vancouver, Sioux Falls, Chattanooga, Brownsville, Fort Lauderdale, Providence, Newport News, Rancho Cucamonga, Santa Rosa, Peoria, Oceanside, Elk Grove, Salem, Pembroke Pines, Eugene, Garden Grove, Cary, Fort Collins, Corona, Springfield, Jackson, Alexandria, Hayward, Clarksville, Lakewood, Lancaster, Salinas, Palmdale, Hollywood, Springfield, Macon, Kansas City, Sunnyvale, Pomona, Killeen, Escondido, Pasadena, Naperville, Bellevue, Joliet, Murfreesboro, Midland, Rockford, Paterson, Savannah, Bridgeport, Torrance, McAllen, Syracuse, Surprise, Denton, Roseville, Thornton, Miramar, Pasadena, Mesquite, Olathe, Dayton, Carrollton, Waco, Orange, Fullerton, Charleston, West Valley City, Visalia, Hampton, Gainesville, Warren, Coral Springs, Cedar Rapids, Round Rock, Sterling Heights, Kent, Columbia, Santa Clara, New Haven, Stamford, Concord, Elizabeth, Athens, Thousand Oaks, Lafayette, Simi Valley, Topeka, Norman, Fargo, Wilmington, Abilene, Odessa, Columbia, Pearland, Victorville, Hartford, Vallejo, Allentown, Berkeley, Richardson, Arvada, Ann Arbor, Rochester, Cambridge, Sugar Land, Lansing, Evansville, College Station, Fairfield, Clearwater, Beaumont, Independence, Provo, West Jordan, Murrieta, Palm Bay, El Monte, Carlsbad, North Charleston, Temecula, Clovis, Springfield, Meridian, Westminster, Costa Mesa, High Point, Manchester, Pueblo, Lakeland, Pompano Beach, West Palm Beach, Antioch, Everett, Downey, Lowell, Centennial, Elgin, Richmond, Peoria, Broken Arrow, Miami Gardens, Billings, Jurupa Valley, Sandy Springs, Gresham, Lewisville, Hillsboro, Ventura, Greeley, Inglewood, Waterbury, League City, Santa Maria, Tyler, Davie, Lakewood, Daly City, Boulder, Allen, West Covina, Sparks, Wichita Falls, Green Bay, San Mateo, Norwalk, Rialto, Las Cruces, Chico, El Cajon, Burbank, South Bend, Renton, Vista, Davenport, Edinburg, Tuscaloosa, Carmel, Spokane Valley, San Angelo, Vacaville, Clinton, Bend, Woodbridge.
Our Products
Our Latest Blogs
Specifications Hastelloy C276 Plate, Sheet & Coils :
Standards: ASTM, ASME and API
Specialize : Shim Sheet, Perforated Sheet, B. Q. Profile.
Size: 6 mm to 120 mm.
Thickness: 0.3 mm To 120 mm
Specifications : ASTM B575 / SB575
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Chemical Composition of ASTM B575 Alloy C276 Plate
Grade | C | Mn | Si | S | Co | Ni | Cr | Fe | Mo | P |
C276 | 0.010 max | 1.00 max | 0.08 max | 0.03 max | 2.50 max | 50.99 min* | 14.50 – 16.50 | 4.00 – 7.00 | 15.00 – 17.00 | 0.04 max |
ASTM B575 Alloy C276 Sheet Mechanical Properties
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Hastelloy C276 | 8.89 g/cm3 | 1370 °C (2500 °F) | Psi – 1,15,000 , MPa – 790 | Psi – 52,000 , MPa – 355 | 40 % |
Material | Ultimate Tensile (min) | Yield Strength (Min) | Elongation % | Hardness Rb | ||
Ksi | Mpa | Ksi | Mpa | |||
C276 Plate | 107.4 | 741 | 50.3 | 347 | 67 | 89 |
C276 Sheet | 115.5 | 796 | 54.6 | 376 | 60 | 86 |
Hastelloy C276 Sheets, Plates & Coils Equivalent Grades
STANDARD | UNS | WERKSTOFF NR. | EN | BS | OR | GOST | JIS |
Hastelloy C276 | N10276 | 2.4819 | NiMo16Cr15W | – | ЭП760 | ХН65МВУ | NW 0276 |
ASTM B575 Alloy C276 Plate melting range |
°C: 1325-1370 |
UNS N10276 Hastelloy C276 Plate density |
g/cm3 :8.89 |
Types of Hastelloy C276 Plate & Sheet we Manufacturer, Stock & Supply :
C276 Hastelloy plate | UNS N10276 Hastelloy C276 Rolling Plate |
ASTM B575 Alloy C276 Chequered Plate | Alloy Hastelloy C276 Quarto Plate |
UNS N10276 Hastelloy C276 Cold Rolled Plate | Alloy Hastelloy C276 Bbq Plate |
Alloy Hastelloy C276 Hot Rolled Plate | ASTM B575 Alloy C276 Perforated Plate |
Alloy Hastelloy C276 Plate Mill Finish | Hastelloy C276 Din 2.4819 Thin Plate |
ASTM B575 Alloy C276 Plate 2b Finish | Alloy C276 Nickel Diamond Plate |
Hastelloy C276 Din 2.4819 Chequer Plate | UNS N10276 Alloy C276 Tread Plate |
Alloy C276 Nickel Clad Plate | Hastelloy C276 Alloy Tisco Plate |
Hastelloy C276 Alloy Checker Plate | 2.4819 Alloy C276 Polished Plate |
UNS N10276 Alloy C276 Plate Mirror Finish | Hastelloy C276 Grade Chequered Plate |
2.4819 Alloy C276 Plate Brushed Finish | Hastelloy C276 Superalloy Hot Rolled Sheet |
Hastelloy C276 Grade 10mm Plate | Hastelloy Alloy C276 Cold Rolled Sheet |
Hastelloy Alloy C276 Custom Cut Plate | Hastelloy C276 Nickel Alloy Sheet |
Hastelloy C276 Superalloy 1/4 Inch Plate | 2.4819 Hastelloy C276 Perforated Sheet |
Hastelloy C276 Nickel Alloy Embossed Plate | C276 Hastelloy Plasma Cutting Plate |
2.4819 Hastelloy C276 Checkered Plate | ASTM B575 Alloy C276 Laser Cut Plate |
Weight per Unit of AMS 5599 Alloy C276 Hastelloy Plate
C276 Hastelloy Sheet Weight & Density
Thickness |
Alloy |
Plate Weight per Unit Area |
Density |
3/16 inches |
Hastelloy C276 |
0.06000 lbs/in²42.184176 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
1/4 inches |
Hastelloy C276 |
0.08 lbs/in²56.245568 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
3/8 inches |
Hastelloy C276 |
0.121 lbs/in²85.0714216 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
1/2 inches |
Hastelloy C276 |
0.161 lbs/in²113.1942056 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
5/8 inches |
Hastelloy C276 |
0.196 lbs/in²137.8016416 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
3/4 inches |
Hastelloy C276 |
0.235 lbs/in²165.221356 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
7/8 inches |
Hastelloy C276 |
0.274 lbs/in²192.6410704 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
1 inches |
Hastelloy C276 |
0.313 lbs/in²220.0607848 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
1 1/4 inches |
Hastelloy C276 |
0.391 lbs/in²274.9002136 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
1 1/2 inches |
Hastelloy C276 |
0.47 lbs/in²330.442712 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
1 3/4 inches |
Hastelloy C276 |
0.549 lbs/in²385.9852104 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
2 inches |
Hastelloy C276 |
0.627 lbs/in²440.8246392 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
2 1/4 inches |
Hastelloy C276 |
0.705 lbs/in²495.664068 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
2 1/2 inches |
Hastelloy C276 |
0.784 lbs/in²551.2065664 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
2 3/4 inches |
Hastelloy C276 |
0.862 lbs/in²606.0459952 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
3 inches |
Hastelloy C276 |
0.941 lbs/in²661.5884936 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
Size chart of C276 Hastelloy Plate
Stocked Sizes | |
Size (in inches) | Size (in mm) |
.125″ | 3.18mm |
.134″ | 3.40mm |
.156″ | 3.96mm |
.187″ | 4.75mm |
.250″ | 6.35mm |
.312″ | 7.92mm |
.375″ | 9.53mm |
.500″ | 12.7mm |
.625″ | 15.9mm |
.750″ | 19.1mm |
.875″ | 22.2mm |
1″ | 25.4mm |
1.125″ | 28.6mm |
1.250″ | 31.8mm |
1.500″ | 38.1mm |
1.750″ | 44.5mm |
2″ | 50.8mm |
2.500″ | 63.5mm |
3″ | 76.2mm |
Dimensions of Hastelloy C276 Plate
Plate Surface finish | Gauge (in) | Width (max in) |
2B – Cold rolled, heat treated, pickled, skin passed Plate | 10–24 | 72* |
2D – Cold rolled, heat treated, pickled plate | 12–24 | 60 |
BA Mexinox only | 18–28 | 48 |
Polished plate (not brushed) | 11–24 | 60 |
Temper rolled plate Mexinox only | 13–29 | 48 |
ASTM B575 C276 Alloy Plate Metric Dimensions
Plate Surface finish | Thickness (mm) | Width (max mm) |
2B – Cold rolled, heat treated, pickled, skin passed plate | 0.25–8.0 | 2032 |
2D – Cold rolled, heat treated, pickled plate | 0.4–6.35 | 1524 |
2E – Cold rolled, heat treated, mechanically descaled plate | 0.4–8.0 | 2032 |
2R – Cold rolled, bright annealed plate | 0.25–3.5 | 1524 |
2H – Work hardened plate | 0.4–6.35 | 1524 |
Polished, brushed plate | 0.5–4.0 | 1524 |
Related Products
- ASTM B168 Inconel 600 Sheet / UNS N06600 Plate
- Inconel 625 Plate / UNS N06625 Sheets
- Inconel 601 Plate / UNS N06601 Sheets
- DIN 2.4858 Incoloy 825 Plate / UNS N06600 Sheet
- Incoloy 800 Plate / UNS N08800 Sheet
- Incoloy 800H Plate / UNS N08810 Sheet
- Incoloy 800HT Plate / UNS N08811 Sheet
- Hastelloy C276 Plate Supplier
- Copper Nickel 90/10 Plate, C70600 Cu-Ni 90/10 Sheet Stockist in USA
- Stainless Steel 253 MA Sheets
- Super Duplex Steel UNS S32750 Plate
- Duplex Steel S31803 Plate/ Sheet Supplier
- Duplex Steel S32205 Plate/ Sheets Supplier
- Sanicro 28 Plate/Sheet Supplier
- ASTM A242 Type 1 Corten Steel Plate
- Corten A588 Grade A Steel Plate
- Corten A588 Grade B Steel Plate
- Corten A Steel Plates & Sheets
- Corten Steel B Plate
- Corten Steel S355JOWP Plates
- Corten Steel S355J2G1W Plates/Sheets
- Corten Steel S355J2G2W Plate
- Corten Steel S355J2W Plates
- Corten Steel S355J2W+N Plate
- Corten Steel S355JOWP+N Plates Manufacturer
- Corten Steel S355K2G1W Plates/Sheets
- Corten Steel S355K2G2W Steel Plate
Before You Go...
would you like a copy of our Handy Guide to leasing an industrial unit straight to your inbox?
Call Us At
Feel free to call on
+91-9619103479
Drop Mail
For Domestic Queries:
sales@amardeepsteel.com
For International Queries:
marketing@amardeepsteel.com