Contact our team with your requirement.For enquiries, email marketing@amardeepsteel.com or sales@amardeepsteel.com.
AMARDEEP STEEL CENTREmarketing@amardeepsteel.com
Amardeep Steel Centre ASC logo
HomeMexicoProduct catalogue

Nickel Products

ASTM B162 Nickel 201 Plate / UNS N02201 Sheet

Home » Mexico Country » Nickel 201 Plate, Nickel N02201 Sheet Supplier

Nickel 201 Plate / UNS N02201 Sheet

Nickel 201 Plates, Nickel Alloy 201 Circle, 201 Nickel Hot Rolled Plates Supplier in Mexico, Stockist of Ni 201 Strip Tape, Nickel Alloy Ni-201 Shim, Nickel alloy 201 price in Mexico, ASTM B 162 Nickel 201 Shim Sheets, UNS N02201 Nickel 201 Coil Price.

Nickel Werkstoff No 2.4068 Sheets, Nickel 201 Sheets Stockist, ASME SB 162 Nickel 201 Plate, Nickel 201 Cold Rolled Plates, Stock of Nickel 201 Alloy Shim Sheet, Stock of Nickel 201 Alloy Shim Sheet, Nickel 2201 2D Plate, ASME SB 162 Alloy 201 Nickel Polished Plate in Mexico. Nickel 201 Plate, UNS N02201 Sheet Price list.

Detailed Information

Nickel Alloy 201 Plates, Sheets & Coils Supplier

Amardeep Steel Centre is an established manufacturer, stockist & supplier of Nickel 201 Plate. Nickel 201 is considered a commercially pure nickel alloy. It has higher nickel content than the Ni 200 alloy. It can contain other elements in the composition such as sulfur, carbon, copper, silicon, manganese, and iron but nickel is over 99% of the composition. The lower carbon content present in Nickel N02201 Polish Plate aids in the prevention of embrittlement, which could be caused by inter-granular carbon on exposure to elevated temperatures. Designated as the Ni 2.4068, the alloy is used mostly in chemical and petrochemical industries. There are different standards, schedules, and pressure classes of the Alloy 2.4068 material to make sure that the correct combinations of the properties are selected in any given product. Ni 201 Alloy Cold Rolled Plate has good resistance to corrosion to both acids as well as to alkalis and is found to be most useful under reducing conditions. Nickel 201 sheet suppliers in Mexico also observe that this metal is particularly resistant to sodium hydroxide even at a temperature above 300C. The material used to produce Pure 201 Nickel Hot Rolled Plate shows good resistance, in salt solutions that are not only acidic or alkaline in nature but also in those salt solutions which are neutral. Therefore the 201 Nickel Clad Plate could be used in the soap industry for the manufacture of soap.

The Pure Nickel 201 Sheet can also be used in the chlorination of aliphatic hydrocarbons such as methane, benzene, or ethane. Other metals in contact with Nickel 201 Perforated Coils, particularly in a damp or acidic environment, may suffer galvanic corrosion even though the stainless metal may be unaffected. These Alloy 201 Sheets are generally highly resistant to attack from acids, but this quality depends on the kind and concentration of the acid, the surrounding temperature, and the type of steel. Our Alloy 201 Plates is resistant to sulphuric acid at room temperature, even in high concentrations.

We Stock Nickel 201 Sheet, 2.4068 Sheet, ASTM B162 Uns N02201 Sheet, ASME SB162 UNS N02201 Sheet, Alloy 201 Sheet, Nickel 201 Plate, 2.4068 Plate, ASTM SB162 UNS N02201 Plate, ASME B162 UNS N02201 Plate, Alloy 201 Plate

Cities We Delivered

New York City, Los Angeles, Chicago, Houston, Phoenix, Philadelphia, San Antonio, San Diego, Dallas, San Jose, Austin, Jacksonville, Fort Worth, Columbus, Charlotte, San Francisco, Indianapolis, Seattle, Denver, Washington, Boston, El Paso, Nashville, Detroit, Oklahoma City, Portland, Las Vegas, Memphis, Louisville, Baltimore, Milwaukee, Albuquerque, Tucson, Fresno, Mesa, Sacramento, Atlanta, Kansas City, Colorado Springs, Omaha, Raleigh, Miami, Long Beach, Virginia Beach, Oakland, Minneapolis, Tulsa, Tampa, Arlington, New Orleans, Wichita, Bakersfield, Cleveland, Aurora, Anaheim, Honolulu, Santa Ana, Riverside, Corpus Christi, Lexington, Henderson, Stockton, Saint Paul, Cincinnati, St. Louis, Pittsburgh, Greensboro, Lincoln, Anchorage, Plano, Orlando, Irvine, Newark, Durham, Chula Vista, Toledo, Fort Wayne, St. Petersburg, Laredo, Jersey City, Chandler, Madison, Lubbock, Scottsdale, Reno, Buffalo, Gilbert, Glendale, North Las Vegas, Winston-Salem, Chesapeake, Norfolk, Fremont, Garland, Irving, Hialeah, Richmond, Boise, Spokane, Baton Rouge, Tacoma, San Bernardino, Modesto, Fontana, Des Moines, Moreno Valley, Santa Clarita, Fayetteville, Birmingham, Oxnard, Rochester, Port St. Lucie, Grand Rapids, Huntsville, Salt Lake City, Frisco, Yonkers, Amarillo, Glendale, Huntington Beach, McKinney, Montgomery, Augusta, Aurora, Akron, Little Rock, Tempe, Columbus, Overland Park, Grand Prairie, Tallahassee, Cape Coral, Mobile, Knoxville, Shreveport, Worcester, Ontario, Vancouver, Sioux Falls, Chattanooga, Brownsville, Fort Lauderdale, Providence, Newport News, Rancho Cucamonga, Santa Rosa, Peoria, Oceanside, Elk Grove, Salem, Pembroke Pines, Eugene, Garden Grove, Cary, Fort Collins, Corona, Springfield, Jackson, Alexandria, Hayward, Clarksville, Lakewood, Lancaster, Salinas, Palmdale, Hollywood, Springfield, Macon, Kansas City, Sunnyvale, Pomona, Killeen, Escondido, Pasadena, Naperville, Bellevue, Joliet, Murfreesboro, Midland, Rockford, Paterson, Savannah, Bridgeport, Torrance, McAllen, Syracuse, Surprise, Denton, Roseville, Thornton, Miramar, Pasadena, Mesquite, Olathe, Dayton, Carrollton, Waco, Orange, Fullerton, Charleston, West Valley City, Visalia, Hampton, Gainesville, Warren, Coral Springs, Cedar Rapids, Round Rock, Sterling Heights, Kent, Columbia, Santa Clara, New Haven, Stamford, Concord, Elizabeth, Athens, Thousand Oaks, Lafayette, Simi Valley, Topeka, Norman, Fargo, Wilmington, Abilene, Odessa, Columbia, Pearland, Victorville, Hartford, Vallejo, Allentown, Berkeley, Richardson, Arvada, Ann Arbor, Rochester, Cambridge, Sugar Land, Lansing, Evansville, College Station, Fairfield, Clearwater, Beaumont, Independence, Provo, West Jordan, Murrieta, Palm Bay, El Monte, Carlsbad, North Charleston, Temecula, Clovis, Springfield, Meridian, Westminster, Costa Mesa, High Point, Manchester, Pueblo, Lakeland, Pompano Beach, West Palm Beach, Antioch, Everett, Downey, Lowell, Centennial, Elgin, Richmond, Peoria, Broken Arrow, Miami Gardens, Billings, Jurupa Valley, Sandy Springs, Gresham, Lewisville, Hillsboro, Ventura, Greeley, Inglewood, Waterbury, League City, Santa Maria, Tyler, Davie, Lakewood, Daly City, Boulder, Allen, West Covina, Sparks, Wichita Falls, Green Bay, San Mateo, Norwalk, Rialto, Las Cruces, Chico, El Cajon, Burbank, South Bend, Renton, Vista, Davenport, Edinburg, Tuscaloosa, Carmel, Spokane Valley, San Angelo, Vacaville, Clinton, Bend, Woodbridge.

Our Products

Browse the full product range

Our Latest Blogs

Specification of Nickel 201 Plate

Grade Nickel 201 (99.0 Ni min) – UNS N02201
Type Clad Plate, Rolling Plate, Flat Shim, Plain Sheet, Rolling Sheet Rolls, Foils, Coils, Plate, Strip, Sheet, Flats, Blank (Circle), Flat Sheet, Shim Sheet, soft annealed, descaled, sheared, annealed, Checker Plate, tread plate
ASTM B162 Alloy 201 Plate surface Hot rolled plate (HR), Cold rolled sheet (CR), No.1 finish hot rolled ASTM B162 Alloy 201 Plate, BA, No.3, No.4, No.6, No.1, No. 2D, No. 2B, BA NO(8), No.7, 2B, 2D, SATIN (Met with Plastic Coated), 2B, 1D, No.4, 8K, BA, hairline, brush, satin, mirror, etc.
ASTM B162 Alloy 201 Plate Length 0-12mm or as required
Alloy Nickel 201 Plate Thickness 0.3 to 1200 mm or as required
201 Nickel Plate Width 0-2500mm or as required
UNS N02201 Nickel 201 Plate Process Hot/ Cold Rolled

Nickel 201 Plate, Sheet & Coil Chemical Composition

Grade C Mn Si S Cu Fe Ni
Nickel 201 0.02 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

Nickel 201 Sheets, Plates & Coils Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 201 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Equivalent Grades for 201 Nickel Sheets & Plates

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 201 2.4068 N02201 NW 2201 NA 12 НП-2 – LC-Ni 99
UNS N02201 Nickel 201 Plate density
lb/in 3 : 0.321

g/cm 3: 8.89

ASTM B162 Alloy 201 Plate melting range
°F: 2615-2635

°C: 1435-1446

Type of Nickel 201 Plate we Manufacture, Stocks & Supply

201 Nickel Plate UNS N02201 Nickel 201 Rolling Plate
ASTM B162 Alloy 201 Chequered Plate Alloy Nickel 201 Quarto Plate
UNS N02201 Nickel 201 Cold Rolled Plate Alloy Nickel 201 Bbq Plate
Alloy Nickel 201 Hot Rolled Plate ASTM B162 Alloy 201 Perforated Plate
Nickel Alloy 201 Custom Cut Plate Nickel 201 Nickel Alloy Sheet
Nickel 201 Nickel Alloy Embossed Plate 201 Nickel Plasma Cutting Plate
Alloy Nickel 201 Plate Mill Finish Nickel 201 Din 2.4068 Thin Plate
ASTM B162 Alloy 201 Plate 2b Finish Alloy 201 Nickel Diamond Plate
Nickel 201 Alloy Checker Plate 2.4068 Alloy 201 Polished Plate
2.4068 Nickel 201 Checkered Plate ASTM B162 Alloy 201 Laser Cut Plate
Nickel 201 Superalloy 1/4 Inch Plate 2.4068 Nickel 201 Perforated Sheet
Nickel 201 Grade 10mm Plate Nickel Alloy 201 Cold Rolled Sheet
2.4068 Alloy 201 Plate Brushed Finish Nickel 201 Superalloy Hot Rolled Sheet
UNS N02201 Alloy 201 Plate Mirror Finish Nickel 201 Grade Chequered Plate
Nickel 201 Din 2.4068 Chequer Plate UNS N02201 Alloy 201 Tread Plate
Alloy 201 Nickel Clad Plate Nickel 201 Alloy Tisco Plate

Size chart of 201 Nickel Plate

Stocked Sizes
Size (in inches) Size (in mm)
.125″ 3.18mm
.134″ 3.40mm
.156″ 3.96mm
.187″ 4.75mm
.250″ 6.35mm
.312″ 7.92mm
.375″ 9.53mm
.500″ 12.7mm
.601″ 15.9mm
.750″ 19.1mm
.875″ 22.2mm
1″ 25.4mm
1.125″ 28.6mm
1.250″ 31.8mm
1.500″ 38.1mm
1.750″ 44.5mm
2″ 50.8mm
2.500″ 63.5mm
3″ 76.2mm

Dimensions: widths 1000/1220/1500 mm, lengths 2000/2500/3000 mm.

Weight per Unit of Alloy 201 Nickel Plate

201 Nickel Sheet Weight & Density

Thickness

Plate Weight per Unit Area

Density

3/16 inches

0.06000 lbs/in²42.184176 kg/m²

0.315 lbs/in³8.72 g/cm³

1/4 inches

0.08 lbs/in²56.245568 kg/m²

0.315 lbs/in³8.72 g/cm³

3/8 inches

0.121 lbs/in²85.0714216 kg/m²

0.315 lbs/in³8.72 g/cm³

1/2 inches

0.161 lbs/in²113.1942056 kg/m²

0.315 lbs/in³8.72 g/cm³

5/8 inches

0.196 lbs/in²137.8016416 kg/m²

0.315 lbs/in³8.72 g/cm³

3/4 inches

0.235 lbs/in²165.221356 kg/m²

0.315 lbs/in³8.72 g/cm³

7/8 inches

0.274 lbs/in²192.6410704 kg/m²

0.315 lbs/in³8.72 g/cm³

1 inches

0.313 lbs/in²220.0607848 kg/m²

0.315 lbs/in³8.72 g/cm³

1 1/4 inches

0.391 lbs/in²274.9002136 kg/m²

0.315 lbs/in³8.72 g/cm³

1 1/2 inches

0.47 lbs/in²330.442712 kg/m²

0.315 lbs/in³8.72 g/cm³

1 3/4 inches

0.549 lbs/in²385.9852104 kg/m²

0.315 lbs/in³8.72 g/cm³

2 inches

0.627 lbs/in²440.8246392 kg/m²

0.315 lbs/in³8.72 g/cm³

2 1/4 inches

0.705 lbs/in²495.664068 kg/m²

0.315 lbs/in³8.72 g/cm³

2 1/2 inches

0.784 lbs/in²551.2065664 kg/m²

0.315 lbs/in³8.72 g/cm³

2 3/4 inches

0.862 lbs/in²606.0459952 kg/m²

0.315 lbs/in³8.72 g/cm³

3 inches

0.941 lbs/in²661.5884936 kg/m²

0.315 lbs/in³8.72 g/cm³

Dimensions of Nickel 201 Plate

ASTM B162 Alloy 201 Plate Imperial Dimensions
Plate Surface finish Gauge (in) Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate 10–24 72*
2D – Cold rolled, heat treated, pickled plate 12–24 60
BA Mexinox only 18–28 48
Polished plate (not brushed) 11–24 60
Temper rolled plate Mexinox only 13–29 48

ASTM B162 201 Alloy Plate Metric Dimensions

Plate Surface finish Thickness (mm) Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate 0.25–8.0 2032
2D – Cold rolled, heat treated, pickled plate 0.4–6.35 1524
2E – Cold rolled, heat treated, mechanically descaled plate 0.4–8.0 2032
2R – Cold rolled, bright annealed plate 0.25–3.5 1524
2H – Work hardened plate 0.4–6.35 1524
Polished, brushed plate 0.5–4.0 1524

Information of Nickel 201 Plate for Buyers

ASTM B162 Alloy 201 Plate, Sheet and Strip ASTM B 162/ ASME SB 162, DIN 17750, ISO 6208
Nickel 201 Plate standards and approvals
  • ASTM A 480
  • ISO 15510
  • EN ISO 18286
  • EN 10088-1
  • EN 10051
  • ASTM A 959
  • EN ISO 9445
  • ASME IID
Tolerances of width and thickness
  • EN 10151 ASTM B162 Alloy 201 strip for springs
  • EN 10258 (formerly DIN 59381)
  • EN 10088 ASTM B162 Alloy 201 strip (general)
UNS N02201 Plate Hardness Half Hard, Soft, Spring Hard, Quarter Hard, Hard ASTM B162 Alloy 201 Sheet suppliers
Availability of ASTM B162 Alloy 201 Foil sizes
  • Width: Up to 500 mm (19.5 in)
  • Thickness : 8-100 microns (0.00031-0.004 in)
  • Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns.
Standard ASTM B162 Alloy 201 Plate & Sheet Sizes 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm
  • Hot rolled 201 Nickel Plate 3.0–10.0 mm
  • Cold rolled 201 Nickel Plate 0.5-6.4 mm
Plasma profiles As per customer’s drawings
Profiling To provide a full profiling service in India we use numerous profiling methods including:
  • Plasma Plate Cutting
  • Oxy-propane Flame Cutting
  • Laser Plate Cutting
Value added services for ASTM B162 Alloy 201 Coil
  • Blanking
  • Slitting
  • Cut-to-length
  • Polishing
Manufacturer & exporter of
  • Alloy Nickel 201 Clad plate: Alloy Nickel 201 Clad plate is a composite steel plate made by bonding UNS N02201 Nickel 201 plate, etc.
  • 201 Nickel Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [601 mm] and over in width;
  • ASTM B162 Alloy 201 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width;
  • ASTM B162 Alloy 201 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [601 mm] in width.
Value added services for ASTM B162 Alloy 201 Plate Waterjet cutting, Laser cutting, Bending and mechanical processing, Plasma cutting, welding, edge preparation, sawing and shearing.
Nickel 201 Plate Origin European Origin, Indian Origin, Japanese Origin
Test SGS testing, UT, TUV etc
Why buy ASTM B162 Alloy 201 Plate from Metal Tube Industries?
  • Mill Test Certificate is supplied with shipment.
  • Free sample
  • EN 10204 3.1
  • Minimum Nitrogen content and Ferrite Count Test
  • Free quote
  • NABL Approved Lab Reports
  • Tested to ASTM A923 Method “C” or ASTM G48 Method “A”.
  • Any third party inspection is accepted.
Packing of Nickel 201 Plate Bundles with waterproof cloth outside or plywood box

Before You Go...

Drop Mail

For Domestic Queries:
sales@amardeepsteel.com

For International Queries:
marketing@amardeepsteel.com