Specification
Chemical Composition
H Fin Tubes Manufacturer & Supplier in India
Detailed Information
H Fin Tubes (or H Finned Tubes, Steel H®/Double H® Finned Surface Tubes) are high efficiency heat transfer tubes with H-shaped fins welded on the tube surface. They increase the heat transfer area, thereby improving thermal efficiency, reducing ash build-up and increasing durability in boilers, economizers, air preheaters, waste heat recovery systems and industrial heat exchangers. They are tough and suited for use in industrial applications involving high temperatures and pressures.
High-Performance H Fin Tubes for Efficient Heat Transfer Applications
Maximize Energy Savings with the superior H Fin Tube for all of your critical heat transfer applications including power plants, petrochemical plants, refinery industries, marine, cement and steel mills, and other industrial applications.
We offer to all major industrial companies that high-efficiency H Finned Tube made under the state of the art welding techniques, latest materials used for robust and rigid designs that provide high thermal performance and durability in even the roughest applications. With an emphasis on high thermal performance, low cost maintenance, and increased productivity we offer Fin Tubes solution that fulfills all the thermal requirements of industrial use.
We are a leading High Finned Tubes Manufacturer and Supplier in India and customize the Fin Tube solution in varied sizes, materials, shapes and international specifications.
What are H Fin Tubes?
H Fin tubes consist of two identical and rectangular fins, welded symmetrically to opposite sides of the bare tubes and forming an “H” shaped profile, thus increasing the outside surface area which increases heat transfer surface compared with bare tubes.
These tubes provide minimal and limited dust & fly ash build up due to this unique design & are widely used for Boilers, Economizers and Air pre-heaters where dust concentration is high.
These products are commonly referred to as:
- H Fin Tubes
- H Finned Tubes
- Square H Type Fin Tube
- Steel H® / Double H® Finned Surface Tubes
- HFW Square Fin Tube
- Double H Finned Tube
Cities We Delivered
New York City, Los Angeles, Chicago, Houston, Phoenix, Philadelphia, San Antonio, San Diego, Dallas, San Jose, Austin, Jacksonville, Fort Worth, Columbus, Charlotte, San Francisco, Indianapolis, Seattle, Denver, Washington, Boston, El Paso, Nashville, Detroit, Oklahoma City, Portland, Las Vegas, Memphis, Louisville, Baltimore, Milwaukee, Albuquerque, Tucson, Fresno, Mesa, Sacramento, Atlanta, Kansas City, Colorado Springs, Omaha, Raleigh, Miami, Long Beach, Virginia Beach, Oakland, Minneapolis, Tulsa, Tampa, Arlington, New Orleans, Wichita, Bakersfield, Cleveland, Aurora, Anaheim, Honolulu, Santa Ana, Riverside, Corpus Christi, Lexington, Henderson, Stockton, Saint Paul, Cincinnati, St. Louis, Pittsburgh, Greensboro, Lincoln, Anchorage, Plano, Orlando, Irvine, Newark, Durham, Chula Vista, Toledo, Fort Wayne, St. Petersburg, Laredo, Jersey City, Chandler, Madison, Lubbock, Scottsdale, Reno, Buffalo, Gilbert, Glendale, North Las Vegas, Winston-Salem, Chesapeake, Norfolk, Fremont, Garland, Irving, Hialeah, Richmond, Boise, Spokane, Baton Rouge, Tacoma, San Bernardino, Modesto, Fontana, Des Moines, Moreno Valley, Santa Clarita, Fayetteville, Birmingham, Oxnard, Rochester, Port St. Lucie, Grand Rapids, Huntsville, Salt Lake City, Frisco, Yonkers, Amarillo, Glendale, Huntington Beach, McKinney, Montgomery, Augusta, Aurora, Akron, Little Rock, Tempe, Columbus, Overland Park, Grand Prairie, Tallahassee, Cape Coral, Mobile, Knoxville, Shreveport, Worcester, Ontario, Vancouver, Sioux Falls, Chattanooga, Brownsville, Fort Lauderdale, Providence, Newport News, Rancho Cucamonga, Santa Rosa, Peoria, Oceanside, Elk Grove, Salem, Pembroke Pines, Eugene, Garden Grove, Cary, Fort Collins, Corona, Springfield, Jackson, Alexandria, Hayward, Clarksville, Lakewood, Lancaster, Salinas, Palmdale, Hollywood, Springfield, Macon, Kansas City, Sunnyvale, Pomona, Killeen, Escondido, Pasadena, Naperville, Bellevue, Joliet, Murfreesboro, Midland, Rockford, Paterson, Savannah, Bridgeport, Torrance, McAllen, Syracuse, Surprise, Denton, Roseville, Thornton, Miramar, Pasadena, Mesquite, Olathe, Dayton, Carrollton, Waco, Orange, Fullerton, Charleston, West Valley City, Visalia, Hampton, Gainesville, Warren, Coral Springs, Cedar Rapids, Round Rock, Sterling Heights, Kent, Columbia, Santa Clara, New Haven, Stamford, Concord, Elizabeth, Athens, Thousand Oaks, Lafayette, Simi Valley, Topeka, Norman, Fargo, Wilmington, Abilene, Odessa, Columbia, Pearland, Victorville, Hartford, Vallejo, Allentown, Berkeley, Richardson, Arvada, Ann Arbor, Rochester, Cambridge, Sugar Land, Lansing, Evansville, College Station, Fairfield, Clearwater, Beaumont, Independence, Provo, West Jordan, Murrieta, Palm Bay, El Monte, Carlsbad, North Charleston, Temecula, Clovis, Springfield, Meridian, Westminster, Costa Mesa, High Point, Manchester, Pueblo, Lakeland, Pompano Beach, West Palm Beach, Antioch, Everett, Downey, Lowell, Centennial, Elgin, Richmond, Peoria, Broken Arrow, Miami Gardens, Billings, Jurupa Valley, Sandy Springs, Gresham, Lewisville, Hillsboro, Ventura, Greeley, Inglewood, Waterbury, League City, Santa Maria, Tyler, Davie, Lakewood, Daly City, Boulder, Allen, West Covina, Sparks, Wichita Falls, Green Bay, San Mateo, Norwalk, Rialto, Las Cruces, Chico, El Cajon, Burbank, South Bend, Renton, Vista, Davenport, Edinburg, Tuscaloosa, Carmel, Spokane Valley, San Angelo, Vacaville, Clinton, Bend, Woodbridge.
Our Products
Our Latest Blogs
Specifications of H Fin Tubes
|
Parameter |
Specification |
|
Product Name |
H Fin Tubes |
|
Tube Type |
Seamless / Welded |
|
Fin Type |
H Fin / Double H Fin |
|
Manufacturing Method |
High Frequency Welded (HFW) |
|
Tube OD |
19 mm – 76 mm |
|
Tube Thickness |
2 mm – 12 mm |
|
Fin Thickness |
1 mm – 5 mm |
|
Fin Height |
8 mm – 40 mm |
|
Tube Length |
Up to 18 meters |
|
Materials |
Carbon Steel, Stainless Steel, Alloy Steel, Copper Alloy |
|
Standards |
ASTM, ASME, DIN, EN, BS, JIS |
|
Surface Finish |
Black, Pickled, Painted, Coated |
|
Testing |
PMI, Hydro Test, Eddy Current, UT, Visual Inspection |
H Finned Tubes Chemical Composition (Typical Carbon Steel Grade)
|
Element |
Percentage (%) |
|
Carbon (C) |
0.26 Max |
|
Manganese (Mn) |
0.60–1.35 |
|
Silicon (Si) |
0.10–0.35 |
|
Phosphorus (P) |
0.035 Max |
|
Sulfur (S) |
0.035 Max |
|
Iron (Fe) |
Balance |
H Fin Tubes Mechanical Properties (Typical Carbon Steel Grade)
|
Property |
Value |
|
Tensile Strength |
485 MPa Min |
|
Yield Strength |
250 MPa Min |
|
Elongation |
22% Min |
|
Hardness |
143 HB Max |
|
Modulus of Elasticity |
200 GPa |
|
Density |
7.85 g/cm³ |
Types of H Fin Tubes We Manufacture
We manufacture and supply a comprehensive range of H finned tube solutions for industrial heat transfer systems.
Square H Type Fin Tube
To maximize the heating surface and improve air flow distribution, the Square H Type Fin Tube is widely used for economizer and boiler.
Steel H® / Double H® Finned Surface Tubes
The dual H shaped fins enhance heat transfer effectively while reducing foul and ash deposit.
HFW Square Fin Tube
Manufactured using High Frequency Welding (HFW), these fin tubes offer exceptional weld strength, superior thermal conductivity, and long service life.
H Finned Tube for Heat Exchangers-Boiler Tubes
H finned tubes for power plants and process heating industry, have the heat recovery in the highest level and operation in optimum operation.
Marine Boiler H-Economizer Tubes
Designed for marine applications, these finned tubes withstand high-pressure and corrosive environments while ensuring reliable heat exchange performance.
Key Features of H Fin Tubes
Our H Fin Tubes are engineered to provide outstanding performance under demanding operating conditions.
Key Features
- Excellent heat transfer efficiency
- Large external surface area
- Reduced ash and dust accumulation
- Superior weld integrity
- High mechanical strength
- Low pressure drop
- Excellent corrosion resistance
- High-temperature stability
- Longer operational life
- Reduced maintenance costs
- Easy installation
- Energy-efficient performance
Applications of H Fin Tubes
Our H Fin Tubes are widely used across numerous industrial sectors.
Industries Served
- Power Plants
- Thermal Power Stations
- Waste Heat Recovery Systems
- Industrial Boilers
- Steam Boilers
- Economizers
- Air Preheaters
- Petrochemical Plants
- Oil & Gas Industry
- Refineries
- Fertilizer Plants
- Sugar Industries
- Chemical Processing Plants
- Steel Plants
- Cement Plants
- Marine Boilers
- HVAC Systems
- Heat Recovery Steam Generators (HRSG)
- Process Heating Equipment
- Industrial Furnaces
Manufacturing Process of H-Fin Tubes
As an experienced Industrial H-fin Tube Exporter, we follow stringent manufacturing procedures to ensure consistent quality.
Related Products
- Finned Tubes
- Carbon Steel Finned Tubes
- Stainless Steel Finned Tubes
- Alloy Steel Finned Tubes
- Boiler Tubes
- Heat Exchanger Tubes
- Economizer Tubes
- Air Preheater Tubes
- High Frequency Welded Finned Tubes
- Spiral Finned Tubes
- Extruded Finned Tubes
Why Choose Our H Fin Tubes?
Industries worldwide rely on us because we deliver engineered solutions designed for long-term performance.
Our advantages include:
- Premium raw materials
- Precision manufacturing
- Customized dimensions
- Competitive pricing
- Fast delivery
- International quality standards
- Experienced technical support
- Worldwide exports
- Reliable packaging
- Strict quality control
Our engineering team works closely with clients to provide fin tube solutions tailored to specific operating temperatures, pressures, and heat transfer requirements.
Request a Quote for H Fin Tubes
Looking for a reliable High Finned Tubes Manufacturer and Supplier in India? We supply precision-engineered H Fin Tubes, H Finned Tubes, Steel H® / Double H® Finned Surface Tubes, HFW Square Fin Tubes, and Marine Boiler H-Economizer Tubes that meet international quality standards. Contact our team today for customized sizes, competitive pricing, and fast global delivery tailored to your project requirements.
- Carbon Steel ASTM A192 Tube Supplier
- ASTM A179 Tube Supplier
- Carbon Steel ASTM A210 Grade A1 Tube
- Carbon Steel ASTM A178 Tube Supplier
- ASTM A334 Grade 1 Low-Temperature Carbon Steel Tube Manufacturer
- Carbon Steel ASTM A214 Tube
- Stainless Steel 304 Tubes
- Stainless Steel 304H Tubes
- Stainless Steel 304l Tubes
- Stainless Steel 310 Tubes
- Stainless Steel 310S Tubes
- Stainless Steel 310H Tubes
- Stainless Steel 316 Tubes
- Stainless Steel 316H Tubes
- Stainless Steel 316L Tubes Supplier, UNS S31603 SS 316L Tube
- Stainless Steel 316TI Tubes, UNS S31635 Seamless Tubes
- Stainless Steel 347 Seamless Tubes/ UNS S34700 SS 347 Tube
- Stainless Steel 347H Seamless Tubes/ UNS S34709 SS Tube
- Stainless Steel 321 Seamless Tubes/ UNS S32100 SS 321 Tube
- Stainless Steel 321H Seamless Tubes/ UNS S32109 SS 321H Tube
- Stainless Steel 904L Seamless Tubes / UNS S904L00 SS 904L Tubes
- UNS N06600 Inconel 600 Tube
- UNS N06601 Inconel 601 Tubes
- UNS N06625 Inconel 625 Tube Supplier
- UNS N06690 Inconel 690 Tubes
- UNS N08800 Incoloy 800 Tubes
- UNS N08810 Incoloy 800H Tubes
- UNS N08811 Incoloy 800HT Tubes
- UNS N08825 Incoloy 825 Tube
- Monel 400 Tube Supplier
- Nickel 200 Tube Suppliers
- Nickel 201 Tube Suppliers
- Hastelloy C276 Tube Manufacturer
- Titanium Grade 2 Tube ManufacturerTitanium Grade 5 Tube Manufacturer
- Titanium Grade 7 Tube Manufacturer
- Titanium Grade 12 Tube Supplier
- Brass Tube Manufacturer
- Admiralty Brass Tube
- Aluminum Brass C68a700 Tubes Supplier
- Alloy 20 Tube Supplier
- Sanicro 28 Tube/ UNS N08028 Sanicro 28 Tubes
- SMO 254 Tube/Pipe Supplier
- Copper Nickel 90/10 Tube Manufacturer
- Copper Nickel 70/30 Tube Manufacturer
- Copper Nickel 95/5 Tubes Manufacturer
- Copper Nickel C71640 Tubes Manufacturer
- ASTM A213 Alloy Steel T5 Tube Manufacturer
- ASTM A213 Alloy Steel T9 Tube Manufacturer
- ASTM A213 Alloy Steel T11 Tube Supplier
- ASTM A213 Alloy Steel T12 Tube Supplier
- ASTM A213 Alloy Steel T22 Tube Manufacturer
- ASTM A213 Alloy Steel T91 Tube Supplier
- ASTM A213 Alloy Steel T92 Tube Supplier
Before You Go...
Drop Mail
For Domestic Queries:
sales@amardeepsteel.com
For International Queries:
marketing@amardeepsteel.com
