Specification
Chemical Composition
Nickel 201 Plates, Nickel Alloy 201 Circle, 201 Nickel Hot Rolled Plates Supplier in the USA, Stockist of Ni 201 Strip Tape, Nickel Alloy Ni-201 Shim, Nickel alloy 201 price in the USA, ASTM B 162 Nickel 201 Shim Sheets, UNS N02201 Nickel 201 Coil Price.
Nickel Werkstoff No 2.4068 Sheets, Nickel 201 Sheets Stockist, ASME SB 162 Nickel 201 Plate, Nickel 201 Cold Rolled Plates, Stock of Nickel 201 Alloy Shim Sheet, Stock of Nickel 201 Alloy Shim Sheet, Nickel 2201 2D Plate, ASME SB 162 Alloy 201 Nickel Polished Plate in the United States. Nickel 201 Plate, UNS N02201 Sheet Price list.
Detailed Information
Nickel Alloy 201 Plates, Sheets & Coils Supplier
Amardeep Steel Centre is an established manufacturer, stockist & supplier of Nickel 201 Plate. Nickel 201 is considered a commercially pure nickel alloy. It has higher nickel content than the Ni 200 alloy. It can contain other elements in the composition such as sulfur, carbon, copper, silicon, manganese, and iron but nickel is over 99% of the composition. The lower carbon content present in Nickel N02201 Polish Plate aids in the prevention of embrittlement, which could be caused by inter-granular carbon on exposure to elevated temperatures. Designated as the Ni 2.4068, the alloy is used mostly in chemical and petrochemical industries. There are different standards, schedules, and pressure classes of the Alloy 2.4068 material to make sure that the correct combinations of the properties are selected in any given product. Ni 201 Alloy Cold Rolled Plate has good resistance to corrosion to both acids as well as to alkalis and is found to be most useful under reducing conditions. Nickel 201 sheet suppliers in the USA also observe that this metal is particularly resistant to sodium hydroxide even at a temperature above 300C. The material used to produce Pure 201 Nickel Hot Rolled Plate shows good resistance, in salt solutions that are not only acidic or alkaline in nature but also in those salt solutions which are neutral. Therefore the 201 Nickel Clad Plate could be used in the soap industry for the manufacture of soap.
The Pure Nickel 201 Sheet can also be used in the chlorination of aliphatic hydrocarbons such as methane, benzene, or ethane. Other metals in contact with Nickel 201 Perforated Coils, particularly in a damp or acidic environment, may suffer galvanic corrosion even though the stainless metal may be unaffected. These Alloy 201 Sheets are generally highly resistant to attack from acids, but this quality depends on the kind and concentration of the acid, the surrounding temperature, and the type of steel. Our Alloy 201 Plates is resistant to sulphuric acid at room temperature, even in high concentrations.
We Stock Nickel 201 Sheet, 2.4068 Sheet, ASTM B162 Uns N02201 Sheet, ASME SB162 UNS N02201 Sheet, Alloy 201 Sheet, Nickel 201 Plate, 2.4068 Plate, ASTM SB162 UNS N02201 Plate, ASME B162 UNS N02201 Plate, Alloy 201 Plate
Cities We Delivered
New York City, Los Angeles, Chicago, Houston, Phoenix, Philadelphia, San Antonio, San Diego, Dallas, San Jose, Austin, Jacksonville, Fort Worth, Columbus, Charlotte, San Francisco, Indianapolis, Seattle, Denver, Washington, Boston, El Paso, Nashville, Detroit, Oklahoma City, Portland, Las Vegas, Memphis, Louisville, Baltimore, Milwaukee, Albuquerque, Tucson, Fresno, Mesa, Sacramento, Atlanta, Kansas City, Colorado Springs, Omaha, Raleigh, Miami, Long Beach, Virginia Beach, Oakland, Minneapolis, Tulsa, Tampa, Arlington, New Orleans, Wichita, Bakersfield, Cleveland, Aurora, Anaheim, Honolulu, Santa Ana, Riverside, Corpus Christi, Lexington, Henderson, Stockton, Saint Paul, Cincinnati, St. Louis, Pittsburgh, Greensboro, Lincoln, Anchorage, Plano, Orlando, Irvine, Newark, Durham, Chula Vista, Toledo, Fort Wayne, St. Petersburg, Laredo, Jersey City, Chandler, Madison, Lubbock, Scottsdale, Reno, Buffalo, Gilbert, Glendale, North Las Vegas, Winston-Salem, Chesapeake, Norfolk, Fremont, Garland, Irving, Hialeah, Richmond, Boise, Spokane, Baton Rouge, Tacoma, San Bernardino, Modesto, Fontana, Des Moines, Moreno Valley, Santa Clarita, Fayetteville, Birmingham, Oxnard, Rochester, Port St. Lucie, Grand Rapids, Huntsville, Salt Lake City, Frisco, Yonkers, Amarillo, Glendale, Huntington Beach, McKinney, Montgomery, Augusta, Aurora, Akron, Little Rock, Tempe, Columbus, Overland Park, Grand Prairie, Tallahassee, Cape Coral, Mobile, Knoxville, Shreveport, Worcester, Ontario, Vancouver, Sioux Falls, Chattanooga, Brownsville, Fort Lauderdale, Providence, Newport News, Rancho Cucamonga, Santa Rosa, Peoria, Oceanside, Elk Grove, Salem, Pembroke Pines, Eugene, Garden Grove, Cary, Fort Collins, Corona, Springfield, Jackson, Alexandria, Hayward, Clarksville, Lakewood, Lancaster, Salinas, Palmdale, Hollywood, Springfield, Macon, Kansas City, Sunnyvale, Pomona, Killeen, Escondido, Pasadena, Naperville, Bellevue, Joliet, Murfreesboro, Midland, Rockford, Paterson, Savannah, Bridgeport, Torrance, McAllen, Syracuse, Surprise, Denton, Roseville, Thornton, Miramar, Pasadena, Mesquite, Olathe, Dayton, Carrollton, Waco, Orange, Fullerton, Charleston, West Valley City, Visalia, Hampton, Gainesville, Warren, Coral Springs, Cedar Rapids, Round Rock, Sterling Heights, Kent, Columbia, Santa Clara, New Haven, Stamford, Concord, Elizabeth, Athens, Thousand Oaks, Lafayette, Simi Valley, Topeka, Norman, Fargo, Wilmington, Abilene, Odessa, Columbia, Pearland, Victorville, Hartford, Vallejo, Allentown, Berkeley, Richardson, Arvada, Ann Arbor, Rochester, Cambridge, Sugar Land, Lansing, Evansville, College Station, Fairfield, Clearwater, Beaumont, Independence, Provo, West Jordan, Murrieta, Palm Bay, El Monte, Carlsbad, North Charleston, Temecula, Clovis, Springfield, Meridian, Westminster, Costa Mesa, High Point, Manchester, Pueblo, Lakeland, Pompano Beach, West Palm Beach, Antioch, Everett, Downey, Lowell, Centennial, Elgin, Richmond, Peoria, Broken Arrow, Miami Gardens, Billings, Jurupa Valley, Sandy Springs, Gresham, Lewisville, Hillsboro, Ventura, Greeley, Inglewood, Waterbury, League City, Santa Maria, Tyler, Davie, Lakewood, Daly City, Boulder, Allen, West Covina, Sparks, Wichita Falls, Green Bay, San Mateo, Norwalk, Rialto, Las Cruces, Chico, El Cajon, Burbank, South Bend, Renton, Vista, Davenport, Edinburg, Tuscaloosa, Carmel, Spokane Valley, San Angelo, Vacaville, Clinton, Bend, Woodbridge.
Our Products
Our Latest Blogs
Benefits and Rusting Capabilities of Corten Steel
Introduction Different steel alloys are used throughout the world for structural purposes. Corten Steel is one such example - providing protection against corrosion and weathering that allows it to last decades. Its rust-resistant properties also make it a popular...
Specification of Nickel 201 Plate
Grade | Nickel 201 (99.0 Ni min) – UNS N02201 |
Type | Clad Plate, Rolling Plate, Flat Shim, Plain Sheet, Rolling Sheet Rolls, Foils, Coils, Plate, Strip, Sheet, Flats, Blank (Circle), Flat Sheet, Shim Sheet, soft annealed, descaled, sheared, annealed, Checker Plate, tread plate |
ASTM B162 Alloy 201 Plate surface | Hot rolled plate (HR), Cold rolled sheet (CR), No.1 finish hot rolled ASTM B162 Alloy 201 Plate, BA, No.3, No.4, No.6, No.1, No. 2D, No. 2B, BA NO(8), No.7, 2B, 2D, SATIN (Met with Plastic Coated), 2B, 1D, No.4, 8K, BA, hairline, brush, satin, mirror, etc. |
ASTM B162 Alloy 201 Plate Length | 0-12mm or as required |
Alloy Nickel 201 Plate Thickness | 0.3 to 1200 mm or as required |
201 Nickel Plate Width | 0-2500mm or as required |
UNS N02201 Nickel 201 Plate Process | Hot/ Cold Rolled |
Nickel 201 Plate, Sheet & Coil Chemical Composition
Grade | C | Mn | Si | S | Cu | Fe | Ni |
Nickel 201 | 0.02 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
Nickel 201 Sheets, Plates & Coils Mechanical Properties
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Nickel 201 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
Equivalent Grades for 201 Nickel Sheets & Plates
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Nickel 201 | 2.4068 | N02201 | NW 2201 | NA 12 | НП-2 | – | LC-Ni 99 |
UNS N02201 Nickel 201 Plate density |
lb/in 3 : 0.321 g/cm 3: 8.89 |
ASTM B162 Alloy 201 Plate melting range |
°F: 2615-2635 °C: 1435-1446 |
Type of Nickel 201 Plate we Manufacture, Stocks & Supply
201 Nickel Plate | UNS N02201 Nickel 201 Rolling Plate |
ASTM B162 Alloy 201 Chequered Plate | Alloy Nickel 201 Quarto Plate |
UNS N02201 Nickel 201 Cold Rolled Plate | Alloy Nickel 201 Bbq Plate |
Alloy Nickel 201 Hot Rolled Plate | ASTM B162 Alloy 201 Perforated Plate |
Nickel Alloy 201 Custom Cut Plate | Nickel 201 Nickel Alloy Sheet |
Nickel 201 Nickel Alloy Embossed Plate | 201 Nickel Plasma Cutting Plate |
Alloy Nickel 201 Plate Mill Finish | Nickel 201 Din 2.4068 Thin Plate |
ASTM B162 Alloy 201 Plate 2b Finish | Alloy 201 Nickel Diamond Plate |
Nickel 201 Alloy Checker Plate | 2.4068 Alloy 201 Polished Plate |
2.4068 Nickel 201 Checkered Plate | ASTM B162 Alloy 201 Laser Cut Plate |
Nickel 201 Superalloy 1/4 Inch Plate | 2.4068 Nickel 201 Perforated Sheet |
Nickel 201 Grade 10mm Plate | Nickel Alloy 201 Cold Rolled Sheet |
2.4068 Alloy 201 Plate Brushed Finish | Nickel 201 Superalloy Hot Rolled Sheet |
UNS N02201 Alloy 201 Plate Mirror Finish | Nickel 201 Grade Chequered Plate |
Nickel 201 Din 2.4068 Chequer Plate | UNS N02201 Alloy 201 Tread Plate |
Alloy 201 Nickel Clad Plate | Nickel 201 Alloy Tisco Plate |
Size chart of 201 Nickel Plate
Stocked Sizes | |
Size (in inches) | Size (in mm) |
.125″ | 3.18mm |
.134″ | 3.40mm |
.156″ | 3.96mm |
.187″ | 4.75mm |
.250″ | 6.35mm |
.312″ | 7.92mm |
.375″ | 9.53mm |
.500″ | 12.7mm |
.601″ | 15.9mm |
.750″ | 19.1mm |
.875″ | 22.2mm |
1″ | 25.4mm |
1.125″ | 28.6mm |
1.250″ | 31.8mm |
1.500″ | 38.1mm |
1.750″ | 44.5mm |
2″ | 50.8mm |
2.500″ | 63.5mm |
3″ | 76.2mm |
Weight per Unit of Alloy 201 Nickel Plate
201 Nickel Sheet Weight & Density
Thickness |
Plate Weight per Unit Area |
Density |
3/16 inches |
0.06000 lbs/in²42.184176 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
1/4 inches |
0.08 lbs/in²56.245568 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
3/8 inches |
0.121 lbs/in²85.0714216 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
1/2 inches |
0.161 lbs/in²113.1942056 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
5/8 inches |
0.196 lbs/in²137.8016416 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
3/4 inches |
0.235 lbs/in²165.221356 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
7/8 inches |
0.274 lbs/in²192.6410704 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
1 inches |
0.313 lbs/in²220.0607848 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
1 1/4 inches |
0.391 lbs/in²274.9002136 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
1 1/2 inches |
0.47 lbs/in²330.442712 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
1 3/4 inches |
0.549 lbs/in²385.9852104 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
2 inches |
0.627 lbs/in²440.8246392 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
2 1/4 inches |
0.705 lbs/in²495.664068 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
2 1/2 inches |
0.784 lbs/in²551.2065664 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
2 3/4 inches |
0.862 lbs/in²606.0459952 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
3 inches |
0.941 lbs/in²661.5884936 kg/m² |
0.315 lbs/in³8.72 g/cm³ |
Dimensions of Nickel 201 Plate
Plate Surface finish | Gauge (in) | Width (max in) |
2B – Cold rolled, heat treated, pickled, skin passed Plate | 10–24 | 72* |
2D – Cold rolled, heat treated, pickled plate | 12–24 | 60 |
BA Mexinox only | 18–28 | 48 |
Polished plate (not brushed) | 11–24 | 60 |
Temper rolled plate Mexinox only | 13–29 | 48 |
ASTM B162 201 Alloy Plate Metric Dimensions
Plate Surface finish | Thickness (mm) | Width (max mm) |
2B – Cold rolled, heat treated, pickled, skin passed plate | 0.25–8.0 | 2032 |
2D – Cold rolled, heat treated, pickled plate | 0.4–6.35 | 1524 |
2E – Cold rolled, heat treated, mechanically descaled plate | 0.4–8.0 | 2032 |
2R – Cold rolled, bright annealed plate | 0.25–3.5 | 1524 |
2H – Work hardened plate | 0.4–6.35 | 1524 |
Polished, brushed plate | 0.5–4.0 | 1524 |
Information of Nickel 201 Plate for Buyers
ASTM B162 Alloy 201 Plate, Sheet and Strip | ASTM B 162/ ASME SB 162, DIN 17750, ISO 6208 |
Nickel 201 Plate standards and approvals |
|
Tolerances of width and thickness |
|
UNS N02201 Plate Hardness | Half Hard, Soft, Spring Hard, Quarter Hard, Hard ASTM B162 Alloy 201 Sheet suppliers |
Availability of ASTM B162 Alloy 201 Foil sizes |
|
Standard ASTM B162 Alloy 201 Plate & Sheet Sizes | 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm
|
Plasma profiles | As per customer’s drawings |
Profiling | To provide a full profiling service in India we use numerous profiling methods including:
|
Value added services for ASTM B162 Alloy 201 Coil |
|
Manufacturer & exporter of |
|
Value added services for ASTM B162 Alloy 201 Plate | Waterjet cutting, Laser cutting, Bending and mechanical processing, Plasma cutting, welding, edge preparation, sawing and shearing. |
Nickel 201 Plate Origin | European Origin, Indian Origin, Japanese Origin |
Test | SGS testing, UT, TUV etc |
Why buy ASTM B162 Alloy 201 Plate from Metal Tube Industries? |
|
Packing of Nickel 201 Plate | Bundles with waterproof cloth outside or plywood box |
Related Products
- ASTM B168 Inconel 600 Sheet / UNS N06600 Plate
- Inconel 625 Plate / UNS N06625 Sheets
- Inconel 601 Plate / UNS N06601 Sheets
- DIN 2.4858 Incoloy 825 Plate / UNS N06600 Sheet
- Incoloy 800 Plate / UNS N08800 Sheet
- Incoloy 800H Plate / UNS N08810 Sheet
- Incoloy 800HT Plate / UNS N08811 Sheet
- Hastelloy C276 Plate Supplier
- Copper Nickel 90/10 Plate, C70600 Cu-Ni 90/10 Sheet Stockist in USA
- Stainless Steel 253 MA Sheets
- Super Duplex Steel UNS S32750 Plate
- Duplex Steel S31803 Plate/ Sheet Supplier
- Duplex Steel S32205 Plate/ Sheets Supplier
- Sanicro 28 Plate/Sheet Supplier
- ASTM A242 Type 1 Corten Steel Plate
- Corten A588 Grade A Steel Plate
- Corten A588 Grade B Steel Plate
- Corten A Steel Plates & Sheets
- Corten Steel B Plate
- Corten Steel S355JOWP Plates
- Corten Steel S355J2G1W Plates/Sheets
- Corten Steel S355J2G2W Plate
- Corten Steel S355J2W Plates
- Corten Steel S355J2W+N Plate
- Corten Steel S355JOWP+N Plates Manufacturer
- Corten Steel S355K2G1W Plates/Sheets
- Corten Steel S355K2G2W Steel Plate
Before You Go...
would you like a copy of our Handy Guide to leasing an industrial unit straight to your inbox?
Call Us At
Feel free to call on
+91-9619103479
Drop Mail
For Domestic Queries:
sales@amardeepsteel.com
For International Queries:
marketing@amardeepsteel.com